Set Handset Date And Time - VTech t2340 User Manual

Installation

Set Handset Date and Time

If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call If you do not have caller ID service, you can set the date and time manually:
• In the event of a
power outage, or if
• Press PROG, then press
your phone's power
• The month is flashing. Press
cord is unplugged,
• The day is flashing. Press
the time setting will
be lost
• The hour is flashing. Press
• The minute is flashing. Press
• AM or PM is flashing. Press
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life
• With the handset in idle (off) mode, press PROG
• Press
• Press SELECT The current setting blinks, and you will hear a sample of the ring
• Press
• Press SELECT
If you subscribe to DSL service:
If you hear noise during conversations and/or your
caller ID features aren't functioning properly, install a
noise filter to the telephone line between the base unit
and the telephone line jack Contact your DSL provider
to obtain a noise filter.
 GETTING STARTED
or until DATE/TIME is displayed Press SELECT.
or
or until the screen displays the correct day
or until the screen displays the correct hour Press SELECT.
or
or
until the screen displays RINGER: and the current setting
or
to select RINGER: , 2, ,  or OFF You will hear a sample of each ring tone
or
www.vtechphones.com
until the screen displays the correct month Press SELECT
until the screen displays the correct minute Press SELECT.
to choose between AM or PM. Press SELECT
Telephone line cord
Press
SELECT.
To single telephone
jack (RJ11C)
Noise filter
(For xDSL users)