Installation
Set handset date and time
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming call.
If you do not have caller ID service, you can set the date and time manually:
Press PROG, then press
•
•
The month is flashing. Press
•
The day is flashing. Press
•
The hour is flashing. Press
•
The minute is flashing. Press
•
AM or PM is flashing. Press
Handset ringer style
You can select from four different handset ringer styles, or turn the ringer off
1 With the handset in idle (off) mode, press PROG
until the screen displays RINGER: and current setting
2 Press
or
3 Press SELECT The current setting blinks, and you will hear a sample of the ring
to select RINGER: 1, 2, 3, 4 or OFF You will hear a sample of each ring tone
4 Press
or
5 Press SELECT to choose the displayed ringer setting
Set ringer volume
You can select from two different handset ringer volume, or turn the ringer off
1
Begin with the handset in idle (off) mode
2
Press and hold
or
3 The current setting blinks, and you will hear a sample of the ring volume
4 Press
or
to select ringer volume: OFF LOW HIGH You will hear a sample of each ring tone
5 Press SELECT to choose the displayed ringer setting
until DATE/TIME is displayed Press SELECT.
or
until the screen displays the correct month Press SELECT
or
or
until the screen displays the correct day
until the screen displays the correct hour Press SELECT.
or
until the screen displays the correct minute Press SELECT.
or
or
to choose between AM or PM. Press SELECT.
until the screen displays OFF LOW HIGH
www.vtechphones.com
• In the event the
Press
SELECT.
battery loses all
of its power or is
removed, the time
setting will be lost
9