Install An Mage - VTech LS6117 User Manual

Getting started
Install an image
1. Perform steps 2 through 9 of the Battery installation and
charging procedure on page 3.
2. Use the enclosed template to cut the desred mage so
that it fits into the transparent image cover.
3. Place the selected mage nsde the transparent mage cover.
4. Place the mage face down nsde the transparent mage cover
wth the top of the mage at the end wth the large tab.
5. Replace the transparent image cover by placing it flat
aganst the handset and sldng t towards the CHARGE
light until it clicks into place as shown in the figure.
6. Charge the handset by placng t n the telephone base.
The handset CHARGE lght wll be on when correctly
placed n the telephone base.
www.vtechphones.com
• You can also
go to www.
vtechphones.com
and use the onlne
tool to create
your own custom
graphc nserts.
5