VTech LS5145 User Manual page 80

Telephone operation
Creating a new phone book entry (continued)
Using the telephone base
• Press CANCEL at
1. Press the MENU softkey when the telephone base s n dle mode.
anytme to dscard
2. Press the SELECT softkey to enter the Phone Book menu.
any changes and
return to the Phone
3. Press the NEW softkey to create a new phone book entry.
Book menu.
4. Enter the name (up to 16 characters) by usng the dal pad (0-9). See the character chart on page 74.
• The dsplay wll
tmeout and return
to the Phone Book
menu f no keys are
pressed wthn 60
seconds.
5. Press the DONE softkey to store the name.
6. Enter the telephone number (up to 32 dgts) by usng the dal pad (0-9).
7. Press the DONE softkey when finished entering the telephone number.
8. Press the SAVE softkey to store the entry.
76
• Each tme a dal key s pressed, the characters on that key wll be hghlghted accordng to the
number of key presses. For nstance, for the letter a, press the 2 dial pad key five times.
Press the LEFT and RIGHT NavKeys to move the cursor left and rght.
•
• Press the ERASE softkey to backspace and delete a hghlghted character.
• Press the LEFT and RIGHT NavKeys to move the cursor left and rght.
• Press the ERASE softkey to backspace and delete a hghlghted dgt.
• Press and hold # untl a P appears on the dsplay to enter a pause.
–OR–
Press the UP and DOWN NavKeys to hghlght and edt the name or number (see steps 4 and 6),
then press the SAVE softkey to store the entry.
www.vtechphones.com