VTech LS5145 User Manual page 107

Troubleshooting
Problem Suggeston
My cell phone
•
disconnects with the
•
telephone base.
•
My cell phone is •
connected to the
telephone base, but I
• Make sure that your cell phone s compatble.
cannot make a CELL
• For some smartphones, make sure that the cellular functon s turned on.
call.
Bluetooth System • Make sure that your cell phone s n dle mode when connected and on the Active Devices lst.
Busy appears on the
• Make sure that your cell phone or headset s not connected to any other Bluetooth devce.
display.
• The LS5145 can only use one Bluetooth devce at a tme.
The PIN on the
•
telephone base does
• If you change the PIN on the telephone base, t wll appear on the telephone base dsplay n the
not work.
I cannot hear •
any audio on my
telephone system
• Turn off your cell phone, then turn t on agan.
when on a CELL call.
Turn off your cell phone, then turn t on agan.
Make sure that you are not usng your cell phone when on a CELL call.
Verfy that the LS5145 s an authorzed devce on your cell phone and s allowed to connect
automatically without confirmation (refer to user's manual of your cell phone for more
nformaton).
Make sure that your cell phone s connected and on the Active Devices lst (page 26) and t s n
dle mode when you are tryng to make a CELL call.
The default PIN s 0000.
parng process.
Reset the telephone base. Unplug the unt's electrcal power and remove any spare batteres.
Wat for approxmately 15 seconds, then plug t back n.
www.vtechphones.com 103