Troubleshooting
Problem
The messages on
the system are very
difficult to hear.
The answering
system does not
respond to remote
commands.
I am having trouble
using the voice mail
feature.
112
Suggeston
• Press the UP NavKey on the handset or on the telephone base to ncrease the speaker
volume.
• Make sure your remote access code s correct (see page 57).
• Make sure you are callng from a touch-tone telephone. When dalng a number, you should
hear tones. If you hear clcks, then t s not a touch-tone telephone and cannot actvate the
answerng system.
• The answerng system may not detect the remote access code when your announcement s
playng. Wat untl the announcement s over before enterng the code.
• There may be interference on the telephone line you are using. Press the dial pad keys firmly
when dalng.
•
Make sure that your voce mal access telephone number and PIN or password (f necessary)
are correctly programmed nto the telephone base (see page 45).
•
Make sure that the voce mal codes (play, stop, and repeat) are correctly programmed nto
the telephone base (see page 46).
•
Refer to your voce mal documentaton for a complete lst of voce mal codes.
•
Please contact your local voce mal servce provder for more nformaton about usng voce
mal.
www.vtechphones.com