Set Number Of Rings; Set Base Ringer - VTech I6787 User Manual

Answering system operation
Answering system setup
The answering system uses voice prompts to guide you through the set up
• When calling
of the answering system. Press
remotely to check
the SETUP menu.
for messages,
select toll saver in

Set number of rings

number of rings
setting will help to
This feature allows you to select the number of rings before the answering
save long distance
system answers. You can choose from two, four or six rings or toll saver. With
charges because
toll saver active, the answering system answers after two rings when there
the answering
are new messages, and after four rings when there are no new messages.
system will answer
To set the number of rings:
the incoming call
• Press SETUP in idle mode, and the system announces the number of
after two rings
when there are
rings setting.
new messages.
• Press
setting, then press SETUP to save the setting and go to the next setting
or press

Set base ringer

This feature allows you to select from three telephone base ringer volume
levels: high, low or off. To set the base ringer:
• Press SETUP in idle mode until the system announces the base ringer
setting.
• Press /SKIP or /REPEAT until the system announces the desired base
ringer volume level, then press SETUP to save the setting and go to the
next setting or press
28
/PLAY/STOP anytime to save and exit
/SKIP or /REPEAT until the system announces the desired
/PLAY/STOP to save and return to idle mode.
/PLAY/STOP to save and return to idle mode.
www.vtechphones.com