Air cleaner cover
Spark plug
Cylinder cover
0.6 to 0.7 mm
Cleaner cover latch
Air cleaner cover
Air filter cover
Air filter
Cleaner cover latch
AIR FILTER
• Check before every use.
• Off the cleaner cover latch, and remove air
cleaner cover and air filter.
• Brush off dust lightly, or clean with compressed
air, or replace the air filter.
• Reinstall filter and cover, engage latch.
CHECK FUEL SYSTEM
• Check before every use.
• After refueling make sure fuel does not leak or
exude from around fuel pipe, fuel grommet or
fuel tank cap.
• In case of fuel leakage or exudation there is a
danger of fire. Stop using the machine
immediately and request your dealer to inspect
or replace.
MAGNETO
• The unit has CDI (Capacitor Discharge Ignition)
system, which does not require adjustment of
ignition timing.
• Check for secure (tight) wire connections.
CYLINDER FINS
• Check periodically.
• Clogged fins will result in poor engine cooling.
• Remove dirt and dust from between fins to let
cooling air pass easily.
SPARK PLUG
• Check periodically.
• The standard spark gap is 0.6 to 0.7 mm.
• Correct the spark gap if it is wider or
narrower than the standard gap.
• Fastening torque: 15 to 17 N·m
19
CS-670