SAFETY RADAR ALERTS
In communities where transmitters are located, the Safety
Warning System displays over 60 voice messages. When
Safety Radar is detected the audio alert is geiger counter-
like.
X
K
PWR
Alert
Ka
Note: Not all areas have Safety Warning System transmitters. Visit
www.safetyradar.com for Safety Warning Systems transmitter loca-
tions.
Laser Audio/Visual Alerts
When a laser signal is detected the alert LED's illuminate
from right to left in a rolling pattern. The audio alert is con-
tinuous for a minimum of 3 seconds. Example:
14
City
VG-2
Alert LED1 and
LED4 flash
LASER ALERTS / VG-2 ALERTS
VG-2 Audio/Visual Alerts
When a VG-2 signal is detected, the detector "hides" its own
radiated signal and becomes undetectable by the VG-2.
PWR
Alert
X
K
Ka
In Highway Mode
In City Mode — VG-2 LED flashes
Every 30 seconds, the detector checks for a VG-2 signal. If
a VG-2 signal is still present, the unit continues to hide and
repeats the VG-2 alert. If no signal is detected, two beeps
are provided, indicating an "all clear" condition. During
VG-2 Alert X, K, and Ka band signals cannot be received.
Note: VG-2 must be turned on to receive VG-2 alerts.
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
Example:
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
15
VG-2
City