Advertisement
6
Check indicator LED for connection quality.
It can take up to a minute for the ranger extender to boot up after moving it.
During this period you will see the blinking green LED once
again.
Solid green
-
Solid amber
Ready to
use.
Weak connection to the
router.
Find an outlet closer
to your router
.
..,.
Blinking amber
Not connected to the router. Find an outlet closer
to your router.
7
Connect your Wi-Fi devices to the extended network
you just created.
Select the extended network on your device's Wi-Fi
manager.
Extended networks are identified by "_Ext" added to the end
of your main network
name(s).
MyWiFi
NeighborsWiFi
Your range extender is now set up. Enjoy your extended
Wi-Fi coverage.
Accessing your range extender settings
afterWPS
Your range extender's default admin password is
"admin".
It is highly
recommended that you change this after WPS setup.
To change or view range extender
settings,
first connect to an extended
network. In a browser, go to http://extender.linksys.com and enter your
admin password.
Advertisement
