Advertisement
1. Connecting with the Wi-Fi Protected Setup Button
Use this method if your access point or router has a Wi-Fi Protected Setup button
a) Press the Wi-Fi Protected Setup button on the extender for one second. If
you have a dual-band router you will do this again to extend the second
network. The 2.4 GHz band will be extended first.
b) Click the Wi-Fi Protected Setup button on the router's Wi-fi Protected
Setup screen (if available), OR press and hold the Wi-Fi Protected Setup
button on the router for one second. When the connection is complete, the
Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.
12
TIP You con a/so complete WPS from the settings interface
by
clicking WPS in the left
navigation bar. Click the Wi-Fi Protected Setup icon on the extender's Wi-Fi Protected
Setup screen. Click OK in that screen within two minutes.
2. Connecting with the Wi-Fi Protected Setup Button
The Wi-Fi Protected Setup PIN (Personal Identification Number) can be found on
the product label on the back of the extender. You can use this method only if
your router's administration utility has a Wi-Fi Protected Setup menu.
2.
If
y
our router
asks
for
the
clienfs
PIN
number
,
enter
this number
14727030
in
you
r
router
device.
a) Enter the extender's PIN into the appropriate field on the router's Wi- Fi
Protected Setup screen. Click Register. When the connection is complete,
the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.
b) ClickOK.
Advertisement
