Advertisement
Before starting setup, make sure your router has a working
Internet connection.
Does your router have a WPS button?
Wi-Fi Protected Setup (WPS) is a simple way to connect
Wi-Fi devices
with Push
Button Connect. Routers that
support WPS
have a button that might look like one of
these symbols:
Yes
No (or not sure)
Continue with
Wi-Fi
Protected Setup below
Continue with Browser-based setup,
also in this Quick Start Guide
NOTE-
The WPS button will not work if you have disabled WPS on your
rout
er.
Wi-Fi Protected Setup {WPS)
1
Plug the range extender into an electrical outlet close to
your router.
You can move the range extender to an ideal location later in step 5
.
After being plugged in, the indicator
LED
on the front of your
range extender will start to
blink green
for up to a minute.
2
Wait for the indicator LED
on the front of your range
extender to start to blink
amber before going to
step 3.
This can take
up to a
minute.
LIN<SYS
RE
0
=
---+r~~+H+--Indicator
LED
Advertisement
