Advertisement
4
Extend your 5 GHz network.
You may skip this step if your router does not have a 5 GHz network or
if
you
don't want to extend that network.
a. Press the WPS button on the side of your router again.
Within the next
two minutes
complete step 4b.
b. Press the WPS button on your range extender again.
The WPS button will light up and the
indicator
LED on the front of your
range extender will start to
blink green.
Watch the indicator LED on the front of your range extender to verify
whether the connection was successful.
If it turns
solid
green,
the connection was successful.
If it starts to
.,_,.
blink amber before
it turns solid green, the connection
failed. You may try again by repeating step 4
.
5
Move your range extender to an ideal spot.
Unplug your range extender and plug it back in
midway between your
router and the area without Wi-Fi.
Using your mobile device or laptop, be
sure you have at least two bars (around 50o/o) of your router's Wi-Fi signal at
that location. If you don't have two bars, move the range extender closer to
the
router.
0
Advertisement
