Table of Contents
Advertisement
For customers using DVD Burner
(sold separately)
Sack-Up Hi-Definition Images
(Easy and correct way of copying to a
DVDJ
1. Get ready a recommended disc
3. Copy all images to the DVD
..-
• There are other ways of copying which includes copying only the desired files.
For details, refer to the instruction manual of the camera (GZ-HD3).
Copying completed!
tCJ
fltlAlIZE
I
~~
~~SElECT
BAU JP
>'~PcAYBACK
VIDEO
~'SElECT
i-SET
....-
"Copy in progress" screen
(Camera's LCD screen display)
@Confirm
(press down)
@Confirm
(press down)
@:leo",""
(press down)
IMPORTANT
• Playback is not possible if the disc is not
finalized .
• Wait for the "copy in progress" screen on the
right and the "hourglass" mark to disappear,
then turn off the power and disconnect the USB
cable.
@Confirm
(press down)
•
Select "ALL"
CD
Select
(move up and down)
•
Confirm that the display on the right
appears on the LCD screen of the
camera (GZ-HD3)
e
Select "NORMAL BACK-UP"
CD
Select
(move up and down)
o
Select "EXECUTE AND FINALIZE"
CD
Select
(move up and down)
f)
Exit
Perform operations on the camera.
Recommended discs
DVD-R DL
I
DVD-R
DVD-RW
(single-sided double layer)
Brand
JVC
JVC
JVC
TDK
Verbatim
Verbatim
SONY
Next, operate the camera (GZ-HD3). Proceed to step 3 . .jIt
o
Connect the USB cable provided with DVD Burner (CU-VD40/CU-VD20)
e
Turn on the DVD Burner
After turning on the power, wait for approximately 20 seconds before proceeding to
step • .
The burner may not function properly within this 20 seconds.
e
Turn on the camera (GZ-HD3)
o
Insert a new recommended disc into the DVD Burner
Please use the recommended discs stated below.
Using discs other than those recommended may cause problem when copying to the DVD
and when playing back the DVD.
2. Set up each device before copying
..
• Only DVD-R and DVD-RW discs can be used.
• Recording and playback may not function properly if the recording side is scratched or dirty.
Advertisement
Table of Contents
