Table of Contents
Advertisement
When Using an SO Card
If you want to record to an SD card, the
following 3 operations need to be performed.
- Operations are certified on the following SO
cards.
Video recording: Class 6 compatible SOHC
card
Still image recording: Panasonic, TOSHIBA,
San Disk, ATP (128 MB to 4 GB) or SOHC
card (4 GB)
-If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
- MultiMediaCards are not supported.
- Files are recorded on an SO card in SP
mode, regardless of the picture quality
setting. You cannot dub these files on HOV
devices in high-definition picture quality.
- Cards used to record video on this camera
cannot be played back on other devices.
I
0 Insert an SO card
Preparation:
Set the power/mode switch to
OFF.
1
Open the SO card cover.
Bottom of the Camera
3
Close the SO card cover.
• To remove an SO card
Push the SO card once.
After the card comes out a little, pull it out.
IImIID
-Insert and remove the SD card only while
the power is turned off. Otherwise, data on
the card may be corrupted.
- Do not touch the terminal on the reverse
side of the label.
o
Change the recording medium
The camera is programmed to record on the
built-in hard disk when it is shipped from the
factory. You can change the recording medium
to SO card.
Set [REC MEDIA FOR VIDEO] and
[REC MEDIA FOR IMAGE] to [SO].
(u pg.
67, 68)
ED
Video picture quality (IT pg. 67) will
automatically be set to [SP].
o
Format an SO card when using it for
the first time
This will also ensure stable speeds and
operation when accessing the SO card.
Select [EXECUTE] in [FORMAT SO
CARD] to format the card. (u pg. 71)
19
Advertisement
Table of Contents
