Technical Data; Safety Instructions; General Safety Rules - DeWalt D27400 Original Instructions Manual

SITE SAW
D27400
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage
Power input
Power output
Blade diameter
Blade bore
Blade body thickness
Max. blade speed, 50Hz
Load speed, 50Hz
Ripping capacity at 90°
(left/right)
Max. mitre angle
(left and right)
Max. bevel angle (left)
Max. depth of cut at 0° bevel
Max. depth of cut at 45° bevel
Automatic blade brake time
Environmental temperature
Weight
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
D27400

Safety Instructions

V 230
AC
W 2,100
W 1,600
mm 315
mm 30
mm 2.2
Read all these instructions before attempting to
min -1 3,000
operate this product and save these instructions.
-1
min 2,800

General Safety Rules

mm 94
1. Keep work area clear.
45°
45°
2. Consider work area environment.
mm 94
mm 66
s < 10
°C 5–40
kg 42
3. Guard against electric shock.
4. Keep other persons away.
5. Store idle tools.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
WARNING! When using electric tools
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and personal injury
including the following.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Cluttered areas and benches invite injuries.
Do not expose the tool to rain. Do not use the
tool in damp or wet conditions. Keep the work
area well lit (250–300 Lux). Do not use the tool
where there is a risk of causing fire or explosion,
e.g., in the presence of flammable liquids and
gases.
Avoid body contact with earthed surfaces (e.g.,
pipes, radiators, cookers and refrigerators).
When using the tool under extreme conditions
(e.g., high humidity, when metal swarf is being
produced, etc.), electric safety can be improved
by inserting an isolating transformer or a (FI)
earth-leakage circuit-breaker.
Do not let persons, especially children, not
involved in the work, touch the tool or the
extension cord and keep them away from the
work area.
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
EN GL IS H
3