Yamaha Tyros3 Service Manual page 121

[INSTALLER]
Displayed message
Now loading. Please wait a moment...
Now installing. Please wait a moment...
Now deleting. Please wait a moment...
Please insert the media.
Install data does not exist.
Can't delete the install data.
E001 Install data address error!
E002 Install data size error!
E003 Install data checksum error!
Install data ID error!
Install data version error!
Install data read error!
E004 Flash ID error!
E005 Flash erase error!
E006 Flash write error!
E007 Flash verify error!
E008 Flash checksum error!
Updating has been completed.
Turn the power off.
The version of the installed program is
X.XX.
To start installation, please press the
[START/STOP] button.
To delete the update program, please
press the [BREAK] button.
The update program is ver.X.XX.
Are you sure you want to update?
YES: Press the [START/STOP] button.
NO: Press the [BREAK] button.
The update program is ver.X.XX.
Are you sure you want to delete?
YES: Press the [START/STOP] button.
NO: Press the [BREAK] button.
Meaning
Data is being loaded. Wait a
Data is being loaded
while.
During installing. Wait a
During installation of data
while.
Data is being deleted. Wait
During data deletion
a while.
There is no media from which data should be
Install the media.
loaded
Upgrading data not found. Data not contained in the media
The version upgrading data
When an error occurs (Media writing disabled)
can not be deleted.
E001 Data address error! When an error occurs (Installation data error)
E002 Data size error! When an error occurs (Installation data error)
E003 Data checksum error! When an error occurs (Installation data error)
Data ID error! When an error occurs (Installation data error)
Data version error! When an error occurs (Installation data error)
Data loading error! When an error occurs (Installation data error)
E004 Flash ID error! When an error occurs (Flash writing disabled)
E005 Flash deletion error! When an error occurs (Flash writing disabled)
E006 Flash writing error! When an error occurs (Flash writing disabled)
E007 Flash verify error! When an error occurs (Flash writing disabled)
E008 Flash checksum error! When an error occurs (Flash writing disabled)
Installation completed.
Turn off the power and then
turn on again. When the installing completed
The version of the installed
program is "X.XX".
To start the installation,
press the [START/STOP]
button.
When the installer is started.
To delete the version
upgrading data, press the
[BREAK] button.
Version upgrading data is
"ver.X.XX".
Do you start installing?
When the completion of the installation is
YES: Press the [START/
detected
STOP] button.
NO: Press the [BREAK]
button.
Version upgrading data is
"ver.X.XX".
Do you delete the data?
YES: Press the [START/ When the deletion of the data is detected
STOP] button.
NO: Press the [BREAK]
button.
Progress/status
Tyros3
How to service
Reinsert the media.
Install the installation fi le again.
Release the protect of the media.
Install the installation fi le again.
Perform reinstallation. Replace
the Flash ROM even if the result is
undesirable after the reinstallation.
121