Date And Time - Q-See QT Series Manual

Date and Time

Setting the Date and Time
ATTENTION: The date and time were
set up in the Startup Wizard. If you have
an incorrect date or time, first check the
settings to see if the time zone is correct.
ATTENTION: When changing the date
and time make sure to back up important
Alarm
video and to discard that all previously
recorded footage or it will appear out of
Sensor Alarm Alarm-Out
sync when trying to playback.
Motion Alarm
A. Select Date and Time in the System tile.
System
Basic
View Log Backup and Restore
Disk Management Storage Mode
Date and Time Information
B. Automatic time synchronizing must be disabled to
modify specific time settings.
Click on Synchronous and select Manual
C. Select your Time Zone
General Settings Date and Time Output Settings
Date and Time
System Time 01/24/2016 10:01:02 AM
Date Format Month/Day/Year
12-Hour
Time Format
Sync Time With Network
Synchronous
NTP
NTP
NTP Server time.windows.com
Manual
Sync Time With Network
Time Zone GMT-08 Las Vegas, San Francisc
DST
B
C
27