Siemens KA D Series Installation Instructions And Instructions For Use page 45

Connecting the refrigerator with the app
1. Once the connection between the refrigerator and
the home network has been established, press the
Super button and the adjustment button -
simultaneously.
"Cn" is shown in the freezer compartment display.
Note
Press both buttons simultaneously.
2. Keep pressing the Options button until "PA" is shown
in the freezer compartment display and "OF" is
shown in the refrigerator compartment display.
3. Press the adjustment button + to connect the
appliance to the app.
An animation is shown in the refrigerator
compartment display.
As soon as the refrigerator and the app are
connected, the refrigerator compartment display
shows "On".
4. Wait until the refrigerator is displayed in the Home
Connect app on the mobile device. Then select +
(add).
If the refrigerator is not automatically displayed, first
select Search for domestic appliances and then
Connect domestic appliance in the Home Connect
app.
5. Follow the instructions in the app until the process is
complete.
The freezer compartment display shows "PA" and the
refrigerator compartment display shows "On".
The refrigerator is successfully connected with the
app.
If the connection fails, check whether the mobile
device is connected to the home network (WLAN).
Then try to establish the connection again.
If "Er" appears in the refrigerator compartment
display, reset the Home Connect settings.
Note
When resetting, all the Home Connect settings are
reset.
Resetting Home Connect settings
If there is a problem when trying to establish a
connection or if you would like to register the appliance
in a different home network (WLAN), the Home Connect
settings can be reset:
1. Press the Super button and the adjustment button -
simultaneously.
"Cn" is shown in the freezer compartment display.
Note
Press both buttons simultaneously.
2. Keep pressing the Options button until "rE" is shown
in the freezer compartment display and "OF" is
shown in the refrigerator compartment display.
3. Press the adjustment button +.
An animation is shown in the refrigerator
compartment display for 15 seconds.
"OF" is subsequently shown in the refrigerator
compartment display.
The Home Connect settings have been reset.
Installing the Home Connect software
update
The refrigerator checks for updates to the Home
Connect software at regular intervals.
If an update is available, "UP" is shown in the
refrigerator compartment temperature display.
Press any button to return the display to the set
temperature.
Installing the update:
1. Press the Super button and the adjustment button -
simultaneously.
"Cn" is shown in the freezer compartment display.
Note
Press both buttons simultaneously.
2. Keep pressing the Options button until "UP" is shown
in the freezer compartment display and "OF" is
shown in the refrigerator compartment display.
3. Press the adjustment button +.
An animation is shown in the refrigerator
compartment display.
The update will be installed.
All buttons are locked during the installation.
If the installation has been completed
■
successfully, "On" is shown in the refrigerator
compartment display.
If the installation has not been completed
■
successfully, "Er" is shown in the refrigerator
compartment display.
Restart the update later on.
If the installation cannot be completed after
multiple attempts, notify Customer Service.
Information on data protection
When your Home Connect refrigerator is connected for
the first time to a WLAN network that is connected to
the Internet, your appliance transmits the following
categories of data to the Home Connect server (initial
registration):
Unique appliance identification (consisting of
■
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication
■
module (to ensure a secure IT connection).
The current software and hardware version of your
■
domestic appliance.
Status of any previous resetting to factory settings.
■
This initial registration prepares the Home Connect
functions for use and is required only when you want to
use Home Connect for the first time.
Note
Note that the Home Connect functions can be used
only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
en
45