Using The Bluetooth® Devices; Bluetooth Profile - JVC KD-BT11 Instructions Manual

Using the Bluetooth® devices
o
Bluetooth
e
Bluetooth is ashort-range wireless radio
communication technology for the mobile device such
as mobile phones, portable PCs, and other devices. The
Bluetooth devices can be connected without cables and
communicate with each other.
• Refer to the list (included in the box) to see the
countries where you may use the BluetoothQII
function.
Bluetooth profile
This unit supports the following Bluetooth profiles;
HFP (Hands-Free Profile) 1.5
OPP (Object Push Profile) 1.1
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (AudioNideo Remote Control Profile) 1.3
Features
You can operate Bluetooth devices through the unit as
follows:
• Receiving acall
• Making acall-from phonebook, from call history
(dialed number/received call), by dialing number, by
preset numbers, by voice command
• Informing you of the arrival of atext message
• Play back aBluetooth audio player
Refer also to the instructions supplied with the
Bluetooth device.
• Connecting a Bluetooth device for
the first time
Pairing and PIN code
When you connect aBluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate with each other.
To make pairing, you may need to enter the PIN
(Personal Identification Number) code of your Bluetooth
device you want to connect.
• Once the connection is established, it is registered in
the unit even if you reset the unit. Up to five devices
can be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at atime.
• To use the Bluetooth function, you need to turn on
Bluetooth function of the device.
Preparation: Operate the device to turn on its
Bluetooth function.
1
While listening to a source•••
2
Select "DEVICE."
3
Select "NEW PAIRING."
10
4
Enter a PIN (Personalldentifi<ation Number)
code to the unit.
• You can enter any number you like (l-digit to
16-digit number). [Initial: 0000]
*
Some devices have their own PIN code. Enter the
specified PIN code to the unit.