Listening To The Satellite Radio - JVC KD-BT11 Instructions Manual

Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of
this unit.
• JVC SIRIUS Satellite radio interface, KS-SRA1DO, for listening to the SIRIUS Satellite radio.
• JVC Smart Digital Adapter, XMDJVC100, for listening to the XM Satellite radio.
mCGlobal Controllnformationl update
• If channels are updated after subscription, updating starts automatically. "UPDATING" flashes and no sound can be
heard.
• Update takes afew minutes to complete.
• During update, you cannot operate your satellite radio.
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available before
activation.
r-
XM1IXM2IXM3 ---- -- :
L - .
l
ATT
XMDirect™ Universal Tuner Box starts updating
all the XM channels. "Channell" is tuned in
automatically.
IT]
r-
SIRIUS1/SIRIUS2/SIRIUS3 -.":
L -
j
SIRIUS Satellite radio starts updating all the SIRIUS
channels.
Once completed, SIRIUS Satellite radio tunes in to
the preset channel, CH184.
[]] Check your SIRIUS ID, see page 24.
Activate your SIRIUS subscription after
connection
IT]
ATT
1II
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-S39-SIRIUS (7474).
"SUB UPDT PRESS ANY KEY" scrolls on the display
once subscription has been completed.
[]] Check your XM Satellite radio ID labelled on
the casing of the XMDirect
TM
Universal Tuner
Box, or tune in to "Channel 0" (see page 18).
II]
Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4or higher).
EXTERNAL DEVICES
Continued on the next page
17