Title Assignment; More About This Unit - JVC KD-BT11 Instructions Manual

2
Show the title entry screen.
Title assignment
More about this unit
Turning off the power
• If you turn off the power while listening to atrack,
playback will start from where it had been stopped
previously next time you turn on the power.
Basic operations
Turning on the power
• By pressing SRC on the unit, you can also turn on the
power. Ifthe source is ready, playback also starts.
BEL
DISP
•
You can assign titles to 30 station frequencies (FM and
AM) using 8characters (maximum) for each title.
• When HD Radio tuner box is connected, this feature
will be disable.
1
Select a station you want to assign a title
(see also page 8).
3
Assign a title.
IT] Select acharacter.
I1J
Move to the next (or previous) character
position.
• Tuner operations
Storing stations in memory
• During SSM search...
- All previously stored stations are erased and the
stations are stored anew.
- Received stations are preset in NO.1 (lowest
frequency) to NO.6 (highest frequency).
- When SSM is over, the station stored in NO.1 will
be automatically tuned in.
• When storing astation manually, the previously
preset station is erased when anew station is stored
in the same preset number.
[Turn]
W
Repeat steps IT] and
I1J
until you finish
entering the title.
4
Finish the procedure.
• Disc operations
Caution for DualDisc playback
• The Non-DVD side of a"DualDisc" does not comply
with the "Compact Disc Digital Audio" standard.
Therefore, the use of Non-DVD side of aDualDisc on
this product may not be recommended.
SEL
.,
To erase the entire title
In step 2 above...
General
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/CD-RWs
(Rewritable) in audio CD (CD-DA), MP3 and WMA
formats.
• [Hold]
DISP
SEL
Continued on the nextpage
SETIINGS & REFERENCES 27