Sterilizing The Biorobot M48 - Qiagen BioRobot M48 User Manual

•
•
5.4.13

Sterilizing the BioRobot M48

This window (Page 14/16) gives you the option of sterilizing
the interior of the BioRobot M48.
If you want to close the QIAsoft M software without sterilizing
the BioRobot M48, click "No". A confirmation dialog box
appears:
•
•
QIAGEN BioRobot M48 01/2003
If infectious samples were not processed and if you want
to run another protocol, click "Cancel" to return to the
first window
If the completed protocol run is the last one of the day,
perform the daily maintenance procedure (Section 6.1,
page 6-2) and click "Next" to move to the next window
Click "Yes" to close the QIAsoft M software
Click "No" to display the first window of the QIAsoft M
software
General Operation
5-27