Hardware Installation - Qiagen BioRobot M48 User Manual

Installation Procedures
WARNING Electrical hazard
Never install a fuse different from that specified in the user
manual.
4.3

Hardware installation

Although installation of the BioRobot M48 is carried out by a
QIAGEN Instrument Service Specialist, the following brief
instructions are provided as reference.
Unpacking the BioRobot M48
The following items are delivered:
•
•
•
•
•
•
4-4
Fuse for 110–120 V Power Supply is Selected
BioRobot M48 workstation
Computer hardware (includes monitor, keyboard, and
mouse)
Power cords for the workstation and computer hardware
Two communication cables: T-NET and RS485
T-NET communication board
BioRobot M48 slide table
QIAGEN BioRobot M48 01/2003
[W12]