Video Output; System Info; Setup Menu (Custom Tab) - Vivitar ViviCam 8300s User Manual

Setup Menu (Custom tab)

1. Slide the mode switch to [
mode dial to [
2. Select the [Custom] menu with the
The [Custom] tab of the set-up menu
is displayed.
3. Select the desired [Custom] option item with
the
to enter its respective menu.
4. Select the desired setting with the
buttons, and press the SET button.
5. To exit from the set-up menu, change the
mode dial setting.
Date/Time
This sets the date and the time.
Refer to the section in this manual titled "Setting the Date and Time" for further details.
Sys. Reset
This returns all basic settings to the
date and time setting will not be reset, however.
* Cancel / Execute
Language
This sets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled "Choosing the OSD Language" for further details.

Video Output

This sets video output standard of the
ViviCam 8300s
* NTSC / PAL

System Info.

This displays the firmware version of the
EN-70
].
/
buttons, and press the SET button
to video equipment.
] and set the
button.
/
ViviCam 8300s
's default settings. Note that the
ViviCam 8300s
so you may connect your
ViviCam 8300s
.