Default Setting - Vivitar ViviCam 8324 Owner's Manual

4. Press the MENU button to confirm.
5. If you selected OK, a Format confirmation message appears.
?
6. Press the Right/Left button to select "Yes" to format, "No" to exit.
7. Press the MENU button to confirm and begin the format.
8. Once the SD card is formatted all the images sitting on the card will be erased and the
camera will revert to the camera standby mode.

Default Setting

You can restore your camera to the original factory settings.
1. Press the Up/Down button to select Default Setting in the Setup menu.
2. Press the MENU button.
3. Press the Up/Down button to select OK
31