Advertisement
In normal display user may press the SET key shortly to toggle between Mode1 and Mode
2 display:
Mode 1: Wind speed, outdoor temperature and relative air pressure are shown.
Outdoor temp
icon
In Mode 1, this reception icon is showing the condition of the
reception of the signal from Thermo-hygro transmitter
Mode 2: Wind gust, dew point, and rainfall (optional) readings are shown.
Note: To view the rainfall data, press the + key after entering Mode 2 display.
Dew point icon
Transmitter signal reception icon
8
Wind speed icon
Rel. Air Pressure icon
Wind gust icon
Rainfall icon
In Mode 2, this reception
icon is showing the
condition of the reception
of the signal from Rain
sensor (only if a rain
sensor is being used)
Advertisement
