Creative MuVo Slim Multi Manual page 3

MuVo_Slim_Multi.book Page 3 Wednesday, April 21, 2004 10:46 AM
2
2
Charging your player
a
2
1
When opening or closing the battery compartment, handle with care. When opening the
panel, make sure you slide out the battery panel as far as you can
1. Insert the supplied battery into your player.
2. Connect your player to your computer's USB port using the supplied USB cable.
appears on your player's LCD.
3. Charge the battery until
first time will take about 3 hours.
• Your player must be disconnected in a proper manner. For more information on stopping
and disconnecting your player, see "Usage" in the "FAQs and Troubleshooting" chapter in
the User's Guide PDF: d:\manual\<language>\manual.pdf (replace d:\ with the drive
letter of your CD-ROM/DVD-ROM drive and <language> with the language that your
document is in).
• You can connect your player to a USB hub with an external power supply. If you are using a
passive or bus-powered USB hub, and the charge symbol does not display, connect the
player directly to your computer's USB port or to a USB hub with an external power supply.
b c
appears on your player's LCD. Charging your battery for the
1
2
3