Contrast Setting; Manual Transmission - Brother 1170 Owner's Manual

34
C H A P T E R F I V E
See
One-Touch
Dialing
p. 23
Press Resolution (before you send the fax)to select the resolution for the
document you're sending.
Standard — suitable for most typed documents.
Fine — good for small print; transmits a little slower than standard
resolution.
Super Fine — good for small print or artwork; transmits slower than fine
resolution.
Photo — use when document has varying shades of gray; slowest
transmission time.
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples,
paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or
fabric.
Make sure documents written with ink are completely dry.

Contrast Setting

If your document is very light or very dark, you might want to set the contrast
accordingly. Use S.LIGHT to send a very light document. Use S.DARK to send a
very dark document.
1
Insert the document, face down, in the feeder.
2
Press Function , ,
1
3
Use or to select AUTO, S.LIGHT, or S.DARK.
4
When the screen displays your selection, press
5
Press Stop to exit.
6
Enter a fax number and press
make a copy.

Manual Transmission

Manual transmission lets you hear the dial tone, ringing, and fax receiving tones
before sending the fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone
— OR — Press Hook
3
Enter the fax number you want to call (you can enter the digits using the
keypad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-index).
.
4
Start to send a fax — OR — Press
and listen for a dial tone.
Set .
Copy to