Changing One Touch And Speed Dial Numbers; Setting Groups For Broadcasting - Brother 1170 Owner's Manual

Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current name stored there, then
prompts you to either
1
Press
making a change.
2
If you want to erase the number, press
of the digits.
3
If you want to change a digit, use
digit you want to change, then press
4
Enter a new number.
5
Follow the directions from Step 4 in Storing One Touch Numbers or Storing
Speed Dial Numbers.

Setting Groups for Broadcasting

See
Number Groups allow you to send the same fax message to many fax numbers by
Storing
pressing only one One Touch key (Broadcasting) and
One Touch
store each fax number as a One Touch or Speed Dial number. Then, you can
Dial
combine them into a Group. Each Number Group uses a One Touch key. Finally,
Numbers
p. 22
you can have up to 6 small Number Groups, or you can assign many numbers to
and
one large group. If you have Model FAX 1170 you can assign up to 49 numbers to
Storing
one large group, and for Models FAX 1270, MFC 1770 and MFC 1780 up to 59
Speed Dial
numbers to one large group.
Numbers
p. 24
1
Press
2
Select a One Touch key to be the Group Number. (For example, press one
touch location
3
Use the dial pad to enter the group number (for example, press
group 1).
1. CHANGE — OR — 2. EXIT.
to change the number stored — OR — Press
1
Function
, 4 , 3 . The screen displays
SELECT ONE-TOUCH
02 for group 2.)
SETUP GROUP:GO
ENTER & SET
F A X S E T T I N G S
to exit without
2
Clear when the cursor is to the far left
or to position the cursor under the
Clear .
Start . First, you'll need to
25
1 for