Table of Contents
Advertisement
I
NTRODUCTION
This manual will guide you through the following installation requirements:
• Installing the Control Head
• Connecting Cables to the Control Head
• Connecting the Control Head to Power
• Powering On the Control Head
• Configuring the Control Head and Basic System Setup
P
REPARATION
Before you start the installation, please take a moment to familiarize yourself with the parts
list and supplies lists. We also encourage you to read the instructions beforehand so that you
may understand the installation requirements.
NOTE: Product supplies and features are subject to change without notice.
Parts
Your ION includes the following items:
A
ION control head with cover
B
in-dash mounting template
C
in-dash mounting hardware
D
(1) rubber gasket
E
(4) nuts
F
(4) flat washers
G
(4) split ring lock washers
H
(4) threaded rods
I
(4) L-brackets
J
power cable
K
serial adapter cable (used with optional-purchase accessories)
Supplies
In addition to the parts supplied with your installation kit, you will need the following items:
• reciprocating saw
• socket wrench
• thread locker (medium strength, removable)
• masking tape
• safety glasses
• dust mask
Introduction
1
A
D
E
F
G
H
I
J
K
Advertisement
Table of Contents
