Panasonic KV-S1057C Service Manual page 49

Item
Double Feed 1. Click "Test" on the main menu.
2. Click "Double Feed" on the Test menu.
3. Set "Send Level".
4. Open the ADF Door, and then place a sheet of clean white
paper between the Scanning Glass (F) and Scanning Glass
(B). Then close the ADF Door.
5. Click "START" to start the double feed sensor's sensitivity
test.
6. Check whether the response level is within the specifications.
(See Remarks.)
7. Click "STOP" to finish this test.
8. Open the ADF Door, and then remove the white paper. Then
close the ADF Door.
9. Click "Close" to return to the Test menu.
Memory 1. Click "Test" on the main menu.
2. Click "Memory" on the Test menu.
3. Click "START" to start the Memory Read / Write Test.
4. Check the result.
5. Click "Close" to return to the Test menu.
Platen Motor 1.Click "Test" on the main menu.
2.Click "Platen Motor" on the Test menu.
3.Click "START" to rotate the Platen Motor.
(It rotates clockwise and counterclockwise alternately.)
4.Click "STOP" to finish the test.
5.Click "Close" to return to the Test menu.
Operation
49
Default Remarks
—
For Error Code details, refer
—
to Sec.
Error Codes
—
( ).
P.44