Test Mode; Engineering Mode; Base Unit - Panasonic PRL Series Service Manual

8 Test Mode

8.1.

Engineering Mode

8.1.1.

Base Unit

Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
Dial keypad
H/S key operation
1). Press MENU .
2). Select "Settings" using
3). Enter "7", "2", "6", "2", "7", "6", "6", "4".
4). Select "Write EEP" using
5). Enter " ", " ", " ", " " (Address). (*1)
6). Enter " ", " " (New Data). (*1)
All manuals and user guides at all-guides.com
【OFF】
【FLASH】
【CALL WAIT】
or
then press SELECT .
Select "Set tel line" using
then press SELECT .
Note: 7262 7664 = PANA SONI
(see letters printed on dial keys)
then press SELECT .
KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20
This pictured model is KX-PRL260
or
25
H/S LCD
Service Mode
Read EEP
Write EEP
BACK SELECT
Set Addr.:
Default Data
CLEAR OK