Performing Daily Maintenance - MUTOH ValueJet VJ-628MP Operation Manual

Performing Daily Maintenance

Important!
When performing daily maintenance, check the points below:
• Do not touch the cleaning wiper and the capping unit with your hands.
If oil from your hands gets on those parts, this cleaning may not be performed properly.
• Do not touch the print head surface with fingers or a cleaning stick.
It can cause damage to the print head.
• Always use a cleaning stick dampened with the dedicated maintenance cleaner in the plastic cup.
DO NOT use non-dedicated maintenance cleaner. It may cause nozzle clogging.
• DO NOT touch the tip of the cleaning sticks with your finger.
If finger oil gets on the stick, it will damage the print head.
1.
How to clean the flushing-box sponge
[1]
[2]
[3]
Use the dropper to moisten the flushing-box sponge with
maintenance cleaner.
• Amount used: 3.0 ml
Do NOT use the maintenance cleaner in the plastic cup that the cleaning stick
is submerged.
Prepare a cleaning stick for cleaning the flushing-box sponge.
Important!
The cleaning stick can be used for 1 week.
Change the cleaning stick once a week, or when the ink on the stick
Once a week cannot be removed.
Use the cleaning stick to clean the whole area of sponge.
Note

Performing Daily Maintenance

67