Cautions in using this product
Do not turn off the printer
Make sure that the power is always turned on. When you are not using the printer, always leave the power on and put the printer
into the sleep mode. In the sleep mode, the printer will periodically circulate the ink in its interior.
If you do not put the printer into the sleep mode, the ink in its interior could settle out and/or coagulate, causing poor image
quality or printer failure.
Agitate the ink cartridges
Agitate the ink cartridges before use. To maintain color stability, make sure that you agitate them periodically.
Otherwise, the ink inside the packs settles or coagulates and may cause poor print quality or a malfunction.
Please use this product periodically
It is recommended to use this product once a week. When left unused for a long time, the print head nozzles can get clogged
causing damage.
Conduct periodic maintenance
This product requires daily maintenance.
• Check the nozzle before and after printing.
If nozzle clog is found, conduct a head cleaning.
• Make sure to perform daily maintenance after you finish printing for the day.
Failure to perform daily maintenance may affect print quality or result in damage to the printer.
"Daily Maintenance" on page 64
• Drain waste ink in the waste liquid tank periodically.
• Clean its exterior and inside once a month.
Some parts need to be replaced periodically
In this product, there are some parts required to be replaced after a long-term use.
• Parts required to be replaced by users: Absorption material for the flushing box, Cutter, Cleaning wiper
• Parts required to be replaced by service personnel: Various motors, Print head
Cautions in using this product
17