LG LDG4315ST Service Manual page 30

REMOVING THE DOOR LOCK ASSEMBL
REMOVING THE DOOR LOCK ASSEMBL
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
1. Turn off the electrical supply and gas supply
going to the range.
2. Pull the range away from the wall so that you can
access the rear panel.
3. Remove the rear back cover and motor cover
(see step 4~5 on page 3-2)
4. Disconnect the wires from the latch drive motor
and switch.
5. Remove the 1 screw from the latch drive.
2 screws 2 screws 2 screws 2 screws 2 screws
2 screws 2 screws 1 screws 2 screws 2 screws 2 screws
2 screws 2 screws 2 screws 2 screws
2 screws 2 screws 2 screws
COMPONENT ACCESS
(For the Lower oven only)
(For the Lower oven only)
6. Unhook the Latch rod from the cam.
3-17
Y
Y