Electrolux Combi TOUCH Series User Manual page 51

Utilities
• Cooking info in option drawer. The activation allows informa-
tion showing up in the drawer.
• Delayed start. The activation allows to postpone a cycle at a
more convenient time.
SETTINGS
Manual
Enable Manual cooking
General
Timer / Temperature
Utilities
Cooking info in drawer
Delayed start
Hold
Hold
• Default convection temperature 70°. Touch the value to set
the required temperature on the appearing keypad.
• Default steam temperature 70°. Touch the value to adjust the
default temperature on the appearing keypad.
• Probe temperature increase 5°. Touch the value to adjust the
probe temperature on the appearing keypad.
SETTINGS
Manual
Enable Manual cooking
General
Timer / Temperature
Utilities
Hold
Default convection
temperature
Default steam temperature
Probe temperature increase
Automatic
This setting allows to enable / disable (
cooking and the related cycles.
SETTINGS
Automatic
Enable Automatic cooking
Food type
Cycles+
Low temperature cooking
Eco Delta cooking
Regeneration
Static combi
Proving
Soous-vide
NOTE!
If a mode is disabled, it is not visible in the upper
drawer.
Food type
• This setting allows single food type showing up on the display.
70C°
70C°
5C°
/ ) the Automatic
Special cycles+
• This setting allows single special cycle showing up on the
display.
Programs
riduzione figura in scala
del 20,5 %
This setting allows to enable / disable (
mode and the related functions.
SETTINGS
Programs
Enable Programs
Show categories
Show most used
Enable Program save
Enable Program modify
Programs delete
Programs overwrite
Grid visualization
Enable skip preheat
Functions
• Show categories. This activation allows food categories to
show up on the display.
• Show most used. It allows most used programs to show up on
the display.
• Enable Programs save. It allows "save program" function to
be shown on the display.
• Enable Programs modify. It allows "modify program" function
to be shown on the display.
• Programs delete. It allows "delete programs" function to be
shown on the display.
• Programs overwrite. It allows "overwrite programs" function to
be shown on the display.
• Grid visualization. Once activated it allow to display all stored
program as a grid. If deactivated, the display show them as a
list.
• Enable skip preheat. It allows to skip the preheating phase.
MultiTimer
This setting allows to enable / disable (
feature.
Once activated, it is possible to:
• enable/disable MultiTimer programs to show up on the
display;
• enable/disable temperature recovery inside the cavity.
SETTINGS
MultiTimer
Enable MultiTimer
Enable MultiTimer programs
Enable temperature recovery
Multitimer presets
Enable presets save
Enable presets modify
Enable presets delete
This setting allows to enable / disable MultiTimer presets
functions:
• Enable Presets save. It allows "save preset" function to be
shown on the display;
/ ) the Programs
/ ) the MultiTimer
51