1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Oven
  5. Combi TOUCH Series
  6. User manual

Electrolux Combi TOUCH Series User Manual

Electrical and gas oven
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Electrical and Gas Oven
Combi TOUCH
EN
User manual *
0595403Y01- 2020.03
*Original instructions

Advertisement

Table of Contents
loading

Related Manuals for Electrolux Combi TOUCH Series

Summary of Contents for Electrolux Combi TOUCH Series

  • Page 1 Electrical and Gas Oven Combi TOUCH User manual * 0595403Y01- 2020.03 *Original instructions...
  • Page 2 Foreword The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the machine (or “appliance“). The following must not be considered a long and exacting list of warnings, but rather a set of instructions suitable for improving machine performance in every respect and, above all, preventing injury to persons and animals and damage to property due to improper operating procedures.

  • Page 3: Table Of Contents

    Contents A WARNING AND SAFETY INFORMATION ......................4 General information ..........................4 Personal protection equipment......................5 General safety ........................... 5 General safety rules..........................6 Safety signs to be placed near the machine area..................8 Reasonably foreseeable improper use ....................8 Machine cleaning and maintenance .......................

  • Page 4: A Warning And Safety Information

    WARNING AND SAFETY INFORMATION General information To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators.

  • Page 5: Personal Protection Equipment

    • Do not store explosive substances, such as pressurized containers with flammable propellant, in this appliance or close to the appliance • Do not remove, tamper with or make the machine data plate and markings illegible. • Refer to the data given on the machine’s data plate for relations with the Manufacturer (e.g. when ordering spare parts, etc.).

  • Page 6: General Safety Rules

    • Never operate the machine, removing, modifying or tampering with the guards, protection or safety devices. • Do not make any modifications to the parts supplied with the appliance. • Several illustrations in the manual show the machine, or parts of it, without guards or with guards removed.
  • Page 7 • Make sure to periodically check correct operation of all the safety devices and the insulation of electrical cables, which must be replaced if damaged. • Repair and extraordinary Maintenance have to be carried out by specialised authorised personnel provided with all the appropriate personal protection equipment, tools, utensils and ancillary means.

  • Page 8: Safety Signs To Be Placed Near The Machine Area

    Mechanical safety characteristics, hazards • The appliance does not have sharp edges or protruding parts. The guards for the moving and live parts are fixed to the cabinet with screws, to prevent accidental access. CAUTION In case of a significant anomaly (e. g. short circuits, wires coming out of the terminal block, motor breakdowns, worn electrical cable sheathing, smell of gas indicating possible leakage, etc.) the operator must: immediately deactivate the machine.

  • Page 9: Machine Cleaning And Maintenance

    • In order to ensure the safety and performance of your equipment, it is recommended that service is undertaken by Electrolux authorised engineers every 12 months, in accordance with Electrolux Service Manuals. Please contact your local Electrolux Service Centre for...

  • Page 10: Bwarranty

    (including impurities and/or other that does not comply with subject to local terms and conditions. the technical requirements for each machine); Check on Electrolux Professional website the list of authorized customer care. GENERAL INFORMATION WARNING Additional indications Refer to “WARNING and Safety...

  • Page 11: Intended Use And Restrictions

    Manufacturer Electrolux Professional SpA or any other compliance with regulations in force in the country of use. service centre authorised by Electrolux The Manufacturer declines any liability for inaccuracies con- Professional SpA.

  • Page 12: Dnormal Machine Use

    NORMAL MACHINE USE Characteristics of personnel trained for Operator qualified for normal machine normal machine use The Customer must make sure the personnel for normal Must have at least: machine use are adequately trained and skilled in their duties, • knowledge of the technology and specific experience in as well as ensuring their own safety and that of other persons.

  • Page 13: Appliance Overview

    20 GN model 6 - 10 GN model Appliance overview 1. Door handle (shape depending on the model) 10. Cavity filter – housing for detergent tabs (cavity washing) 2. Glass door 11. ON/OFF button 3. Led bar for lighting cavity 12.

  • Page 14: Control Panel

    1. Turn the door handle clockwise or counterclockwise all the way to fully open the oven door. The cooking cycle is stopped, if in progress. 2. To close the door press it against the oven enough to lock it. 20 GN Model 1.

  • Page 15: Main Menu

    Manual Automatic Programs SkyHub Cleaning Settings °C The display illuminates, loads the software and after a while Agenda Help Agenda Plan & shows, by default the following screen, in MANUAL mode. save Models with boiler 01:20 h:m NOTE! To navigate inside the main menu, always touch the MANUAL USER upper drawer.

  • Page 16: Touch Screen Commands / Info And Display Messages

    Settings mode Touch this icon to come back to the previous menu “Settings mode “ allows to customize the oven func- tions and options for a better use. < SCROLLING AREA Options> Touch this icon to start a cycle Help This function provides QR codes in order to display the user manual on your device (smartphone, tablet or laptop).

  • Page 17: Drawers Area

    LOWER DRAWER Alarms signalling icon • This drawer allows to access to further options, accessories and advanced features. A pop up window appears on the display to show the alarm in – Lower drawer opening: progress. The icon remain visible until the problem is resolved.

  • Page 18: Manual Mode

    00:20 m:s BOILER BOILERLESS 00 30 160°C MANUAL MANUAL Water Half Food speed injection power Safe 00:30 h:m Control Delayed Save start program °C 5:30 100% 300°C 120°C °C 00 30 160°C 00 30 160°C Reduced power 00:30 h:m 00:30 h:m Touch this icon to limit the power peak of the installed power.
  • Page 19 If it is necessary, set the required HUMIDITY; Food Probe • Touch the row of the humidity value; • Enter the new value on the numeric keypad appearing on the display. MultiTimer MANUAL USER MANUAL USER IMPORTANT The numeric keypad allows to set further options of the cycle without returning back to the first page of 1 2 3 Manual mode.
  • Page 20 C. The display shows the set cooking cycle with the delayed MAN UAL USER start. Touch the button to confirm it (“C“). MANUAL Preheating °C 250°C 00:45 09 00 0 130 09:30 09:30 NOTE! If the cavity temperature is too high a message asks •...
  • Page 21 MAN UAL USER 5. Close the door and press button. NOTE! Cycle done! To delete ECO-DELTA function touch the icon again. Now holding With ECODELTA on, the mode “Cooking Time“ switches automatically to the “Core Probe“ mode, 5.7 kWh that detects the inside temperature of the food 00:35:00 (65℃).
  • Page 22 • Touch the humidity row. Enter the new value on the keypad (e. • Controlling HUMIDITY PERCENTAGE g. 50). Enter a value on the numeric keypad (for example 30). The The oven will reach and maintain the set humidity during the vent is closed for the corresponding 30% humidity.
  • Page 23 DISPLAYED TIME Remove the core probe from its seat and insert it in the product without forcing excessively; • If this option is activated the time displayed is converted from Make sure the tip (the sensitive part) is positioned near the hours/minutes into minutes/seconds and viceversa.
  • Page 24 NOTE! • Touch the touch time area on the right part of the row; This function cannot be selected in a multiphase MANUAL MANUAL cycle. 00:30 MultiTimer MultiTimer Setting a MultiTimer option Preset 1 ---- --:-- --:--h:m 1 2 3 1.
  • Page 25 MANUAL USER MultiTimer When the last preset ends and the food is removed, hold PreA 10:30m:s Delete the Preset ---- --:-- h:m down the button to stop the preset cycle. ---- --:-- h:m • Additional actions on the program can be done through the ---- --:-- h:m lower drawer.

  • Page 26: Automatic Mode

    MANUAL MANUAL Duplicate phase Multiphase Multiphase If there is only one phase, it is not possible to move or delete a phase but only Duplicate. °C 00:30 Chill Chill °C 00:30 °C 00:30 SKIP option (available during a running programme only): °C 00:30 °C 00:30 °C...
  • Page 27 How to set an automatic cycle Select the required preset and, if required, set the parameters. 1. Open the upper drawer and select Automatic mode If needed, change the temperature and/or the cooking MANUAL control; USER USER AUTOMATIC AUTOMATIC Manual Automatic Programs Meat loaf...

  • Page 28: Cycles+ / Special Cycles

    • see Factory presets or User presets Steps view • delete the selected presets (select one or more presets showed on the display and confirm.) 10. At the end of the cycle the display shows the following • restore factory presets; information: Touch start the cycle;...
  • Page 29 • Searing: dry thermal sealing of food Saving presets • Cooling • Once the cycle is set, it is possible to save it as a preset; • Maturing: slow cooking Open the lower drawer and select the related icon. • Holding: keeping food at required temperature USER AUTOMATIC AUTOMATIC...
  • Page 30 AUTOMATIC USER PRESET 1 USER AUTOMATIC USER Cycles+ Eco Delta cooking Eco Delta cooking Low temper. Eco Delta Regeneration cooking cooking Delta progressive °C °C Static combi Proving Sous vide 100°C 01:30 20°C °C Advance FSC FSC low risk FSC high risk guide guide 01:30 h:m...
  • Page 31 It is possible to save and store the performed presets; see how to 5. Once the set cavity temperature is reached, load the food manage them at Presets management paragraph of this chapter. into the oven and the food core probe into the product. When the “F“...
  • Page 32 – If the FSC parameter is satisfied a recap message informs – If the FSC parameter is satisfied a recap message about about the successfully ending of the cycle; ending cycle pops up; PRESET 1 USER PRESET 1 USER PRESET 1 USER PRESET 1 USER...

  • Page 33: Programs Mode

    NEW PROGRAM’S NAME MANUAL USER AUTOMATIC USER PRESET 1 USER Cycles+ 1 2 3 4 5 6 7 8 9 0 Low temper. Eco Delta Regeneration cooking cooking °C Q W E R T Y U I O P Static combi Proving Sous vide S D F G...
  • Page 34 • Touch the image icon to change the default image; DELETE PROGRAM Choose the required image and confirm it. PROGRAMS USER PICTURE • Touch the recycle bin icon to delete a program; Confirm to delete. All programs PROGRAMS PROGRAMS USER USER PROGRAMS USER...
  • Page 35 All programs – see only the list of Multi timer programs – select • Touch icon to close the EDIT window; Program number 1 with minimum 40 characters MultiTimer programs PROGRAM 1 PROGRAM 1 Program number 3 AUTOMATIC Program’s name 3 Program number 4 with All programs minimum 40 characters...

  • Page 36: Skyhub Favorites Mode (Homepage)

    Multit Ste ano s a ourites Clean SkyHub favorites mode (Homepage) 5. To save your favourites open the lower drawer and touch “Manage SkyHub” icon. Settin This mode is a repository of links to the most used features of the Strong cleaning The green icon becomes white.
  • Page 37 2. Select a date and time; • Touch to confirm it; The display shows in the calendar the selected program at the AGENDA USER AGENDA USER required time; 2018 December 2018 AGENDA April 2019 December 00:00 01:00 02:00 06:00 03:00 07:00 04:00 08:00...
  • Page 38 • Select the required cleaning cycle among the available ones; AGENDA AGENDA The display shows the selected cycle details. Reminder April 2019 11th April 2019 - 09:00 AGENDA AGENDA Type Reminder Cleaning Automatic Program 11th April 2019 - 12:00 09:00 Cleaning Reminder Type...

  • Page 39: Usb Mode

    • Select the required items and confirm. AGENDA USER December 2018 Download all Download all Agenda 09:00 Automatic presets Automatic presets 10:00 Food safety HACCP Counters 11:00 Food safety FSC 12:00 Make it mine Multitimer presets 13:00 Pictures Multitimer programs 14:00 Programs Parameters...
  • Page 40 • Select one of the existing backups. Then select the required Select all items associated with the selected backup. USER USER Show selected Upload all Backup 20190607 Touch Programs and/or MultiTimer programs. When the word- Backup 20190607 ings become green all the associated programs are shown on Programs Backup 20171222 the display.

  • Page 41: Plan&Save/Cooking Optimizer Mode

    • All files associated are selected. Deselect the not needed files 2. Select an existing list or create a new one; and touch to confirm it. PLAN & SAVE PLAN & SAVE Regarding the selected files, the oven asks to choose: New list All lists –...
  • Page 42 • Touch icon to confirm it; 4. When the oven has optimized the sequence, press button to start the execution; PLAN & SAVE PLAN & SAVE USER USER PLAN & SAVE Programs New list New list Program 1 Automatic Cooking done! Program 2 Programs Program 3...

  • Page 43: Skyduo Mode (Optional For Skyline)

    A pop up message informs that this change cannot be saved. Select Time or Probe ( for example Time). d. Start the cycle; • Touch icon to delete the item; USER AUTOMATIC PLAN & SAVE New list Meat Plan & Save Preset / Program 1 00:00 h:m Parameter 1...

  • Page 44: Cleaning Mode

    Some minutes before the oven cycle ending, precooling Put the cleaning agents into the centre bottom of the cavity cycle starts to prepare the blast chiller cavity for the food or into the front drawer under the oven cavity, depending on just cooked.
  • Page 45 Use only original or recommended maintenance/ demand) cleaning products. Cleaning agents being not The optional accessory EXTERNAL CONNEC- original or not recommended by Electrolux Profes- TION KIT FOR DETERGENT/RINSE AID is sional can seriously damage the appliance. required (on demand); the oven will automatically...
  • Page 46 Electrolux Professional. In any case make sure the supplier of the chemicals guarantees the deter- gents and rinse aid agents feature fluid category 3 .

  • Page 47: Boiler Maintenance

    – the duration of the set cycle End of cycle • Cleaning done: info on consumptions Electric and Gas models CLEANING USER CLEANING USER Medium cleaning Do not open the door! Medium cleaning Medium cleaning done! done! 0 139 5.7 kWh 10 l 10 l 01:40 h:m...

  • Page 48: Settings

    IMPORTANT Default setting Always skipping the Rinse Aid and Boiler Descale If it is required to restore the factory setting, proceed ad follows: phase may lead to lime build up in the boiler. After a 1. Open the lower drawer and select the related icon; certain time, the oven disables this feature and asks for a complete cleaning programme with solid SETTINGS...
  • Page 49 SETTINGS SERVICE Cavity light Date Set format This setting allows to enable / disable the cavity light ( D/M/Y M/D/Y Y/M/D • Set the brightness from 0 to 100 %; Set date • Enable / disable the end-cooking blinking light; 2017 •...
  • Page 50 del 20,5 % SETTINGS Manual Enable Manual Cooking cycle General Touch to test. Hold down to exit. Timer/Temperature dialogs Utilities Hold Food safety riduzione figura in scala NOTE! del 20,5 % If a mode is disabled, it is not visible in the upper This setting allows to enable / disable ( ) the following drawer.
  • Page 51 Utilities Special cycles+ • Cooking info in option drawer. The activation allows informa- • This setting allows single special cycle showing up on the tion showing up in the drawer. display. • Delayed start. The activation allows to postpone a cycle at a more convenient time.
  • Page 52 • Enable Presets modify. It allows “modify preset“ function to be SETTINGS shown on the display; Green Spirit • Enable Presets delete. It allows “delete preset“ function to be shown on the display. Enable saving options Cleaning Skip rinse aid and boiler descale SkyHub favorite Mode (Homepage/SoloMio) Skip drying phase...

  • Page 53: Goven Care

    SETTINGS SERVICE If the password is forgotten, contact the Service. All settings Service Manual Automatic Programs • This environment is only allowed to an authorized technician. MultiTimer SkyHub Cleaning Green Spirit Accessories Identity Card User Password Service OVEN CARE Refer to “WARNING and Safety Information“. The descaling cycle is included in the same washing programs as the cooking chamber, with the exception of the rinsing program.
  • Page 54 It is a polyurethane sponge, housed in a metal support equipped 3. Insert the new gasket along the entire seat. with slits for the inlet of the cooling air of the oven components (see figure for “table-top“ models for example). It avoids that the impurities of the kitchen environment (oils, greases, flours, powders,...) are transported on the internal components causing malfunctions.

  • Page 55: Particular Cleaning

    IMPORTANT 2. With the door open, press the two top and bottom retaining It is strongly recommended to clean each day the clips as shown in the figure to reach the interspace between area along the entire door perimeter, the rubber the inner and external glass;...

  • Page 56: Idle Periods

    2. Remove the metal cover (“B“) and use the same system to clean the single check valve (“C“); 3. Use regularly a pipe cleaner with nylon bristles (supplied with the appliance, according to the model) to clean the small gutter (“D“). •...

  • Page 57: Htroubleshooting

    Maintenance, inspections, checks and cleaning Frequency Responsibility Control • check the mechanical part, for cracks or deformation, tightening Yearly Service of screws: check the readability and condition of words, stickers and symbols and restore if necessary. Machine structure Yearly Service •...
  • Page 58 Anom- Type of Description Possible causes Actions anomaly Warning Air filter absent • Filter not detected; • Refit the filter; • Possible damage to inter- • If the problem persists call Service. nal electric and electronic components due to air filter absence.
  • Page 59 Anom- Type of Description Possible causes Actions anomaly BSOt Stops Boiler SSR NTC over- The oven can continue to work in recovery • Inlet air filter dirty; cooking temperature (NTC4) mode: cooking cycles will not use the boiler. • Cooling fan failure; cycle •...
  • Page 60 Anom- Type of Description Possible causes Actions anomaly dESC Stops Clean Boiler Scale in the boiler Run a cleaning program including the rinse and boiler descale cycle and use 2 tabs C25 only. (Follow the procedure as per User Manual) EbOL Stops Boiler thermocouple...
  • Page 61 Anom- Type of Description Possible causes Actions anomaly Stops Boiler safety thermo- The oven is not able to produce steam with the • Missing water in the cycle/boiler stat trips. boiler. An alternative device will be used, but the boiler; Overtemperature in performance will be reduced;...
  • Page 62 Anom- Type of Description Possible causes Actions anomaly FSnr Warning Cooling fan issue • Inlet air filter dirty • Clean inlet air filter; • Cooling fan failure • Check with a thin strip of paper whether a consistent air flow can be detected at the cooling air inlet: if not, call Service.
  • Page 63 Anom- Type of Description Possible causes Actions anomaly HFnI Stops Humidifier not working The oven has detected a problem with the • Water missing; humidifier humidifier (ISG). It is only possible to cook in • ISG circuit obstruction. convection mode. Verify the water supply valve is fully open and the water filler has no obstructions.

  • Page 64: Ifurther Information

    NOTE! The appliance PNC and serial number are essential for identifying the type of appliance and date of manufacture: FURTHER INFORMATION Ergonomic features I.1.1 Certification The ergonomic features of your product, that may influence your physical and cognitive interaction with it, have been assessed and certified.
  • Page 65 5 Kg 5 Kg <15 Kg 10 Kg 10 Kg <10 Kg 15 Kg 15 Kg <5 Kg <3 Kg Blast Chiller 50Kg Oven 10G + Base 5 Kg 5 Kg 10 Kg 10 Kg <15 Kg <10 Kg 15 Kg 15 Kg <5 Kg <3 Kg...

  • Page 66: Jmachine Disposal

    3 Kg 5 Kg 5 Kg 10 Kg 10 Kg <15 Kg <10 Kg <5 Kg 15 Kg <3 Kg 10 Kg 10 Kg 5 Kg 5 Kg 3 Kg Blast Chiller 30Kg + Oven 6G Oven 6G + Oven 10G I.1.2.1 Recommendations on accessories •...
  • Page 68 Electrolux Professional SPA Viale Treviso 15 33170 Pordenone www.professional.electrolux.com...

Table of Contents