Programs Mode - Electrolux Combi TOUCH Series User Manual

AUTOMATIC USER
Cycles+
Low temper. Eco Delta Regeneration
cooking cooking
Static combi Proving Sous vide
Advance FSC FSC low risk FSC high risk
guide guide
Dehydratating Fresh pasta Smoker
pastorization
To set the cycle proceed as follows:
• Set the cavity temperature (A);
• Set the core probe temperature or the time (B);
• Touch button to start the cycle;
If the cavity temperature is lower or higher then the set
temperature the oven starts a cooling or a preheating phase.
• Once the set cavity temperature is reached, load the food into
the oven and the food core probe into the product.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
It is possible to save and store the performed presets; see how to
manage them at Presets management paragraph of this chapter.
F.7

Programs mode

The "Programs Mode" allows to recall program recipes already
stored or create and store new ones.
1. Select Programs mode. The display shows all stored
programs.
(To change the programs displaying see F.15 Settings
chapter ⇨ Programs mode ⇨ grid visualization).
2. Touch the required program;
Manual Automatic Prog rams
20 %
50%
Custom Cleaning Settings
25
°C
?
160°C
Help User Agenda
Plan &
0 120 :
save
:00
01:20 h:m
The oven loads the program in Manual mode ready to be
launched.
How to create and save a program
• Select a cycle in Manual mode (see F.5 Manual mode
chapter);
• If necessary modify the cooking parameters according to your
requirement;
• Open the lower drawer and touch the relevant icon to save the
programme;
• Edit the program name on the appearing keypad and confirm.
PRESET 1 USER
1
100
°C
A
10
°C
25 °C
B
4
PROGRAM S USER
All p rog rams
Prog ram's Prog ram's Prog ram's
name 1 name 2 name 3
Prog ram's Prog ram's Prog ram's
name 4 name 5 name 6
Prog ram's Prog ram's Prog ram's
name 7 name 8 name 9
Prog ram's Prog ram's Prog ram's
name 10 name 11 name 12
MANUAL USER
100
%
00 30 160°C :
7
FSC
:00
Fan Water Half Food
speed injection power Safe
00:30 h:m
Control
1
Delayed Save
start program
5:30 100% 300°C 120°C
PM
The new program will be stored in Programs mode.
New program
20
%
1
2
100
°C
160°C
00:30
:00
01:30 h:m
How to manage stored programs
1. Touch the 3 dots near the program icon to access the
"features management" menu;
PROGRAMS USER
All programs
Program's Program's Program's
name 1 name 2 name 3
Program's Program's Program's
name 4 name 5 name 6
Program's Program's Program's
name 7 name 8 name 9
Program's Program's Program's
name 10 name 11 name 12
CHANGE IMAGE
NEW PROGRAM'S NAME
1 2 3 4 5 6 7 8 9 0
Q W E R T Y U I O P
2
A S D F G H J K L
Z X C V B N M
Space #+,
3
PROGRAMS
All programs
Program 5 New program
PROGRAMS USER
All programs
Program's Program's Program's
Abc
name 1 name 2 name 3
Program's Program's Program's
name 4 name 5 name 6
Program's Program's Program's
name 7 name 8 name 9
Program's Program's Program's
name 10 name 11 name 12
33