Table of Contents
Advertisement
Electrical Power Requirements (Applicable for Units Using External Power Supply)
• Units that are only equipped with the 50L console are self powered.
• Units with the 50L console can be used with an optional 12 VDC external power supply. Use of an attachable
TV requires a 12 VDC external power supply.
• Units with the 70T console are required to use a 24 VDC external power supply.
Warning: Use only the supplied power brick and line cord. Do not use any modification to connect to a
2-prong outlet. Product must be connected to a properly rated 3-prong outlet.
Console
50L
50L with Attachable TV
70T
Outlet Voltage
120 VAC
230 VAC
Note: Do not modify the plug provided with this product. If the plug does not fit into an available electrical
outlet, have a proper outlet installed by a qualified electrician.
Note: Make sure the power brick cord is securely connected to the base unit. A loose connection may result
in the unit not receiving external power.
Optional External Power Supply
The bike's optional external supply feature makes it possible for the console to be powered by an external electrical
source. This eliminates the need to pedal at a minimum speed to supply constant power to the console. With this
option, users who ride the bike for rehabilitative exercise may pedal at a rate below the minimum without losing
console power.
1. Plug the power to the external power connector on the front end of the bike.
2. Tighten the connector to the unit until its securely in place.
3. Plug the cord into an AC outlet.
Use only the external power supply provided by Cybex International, Inc. in order to insure against unsafe operation.
Note: Units with the 50L console use a 12 VDC power supply. The 70T console uses a 24 VDC power supply.
The base electronics have been designed to identify the console type before switching power to the console,
and will not apply an incorrect voltage to a console.
Caution: Connectors should easily fit into the receptacles. Forcing a connection may lead to damage to
the barrel connector and/or receptacle and may void product warranty. If the power supply barrel doesn't
fit easily into the receptacle then the wrong power supply is being used.
This option requires an optional kit. Contact Customer Support Services to order the kit.
Supply Voltage
Frequency
95 - 264 VAC
47 - 63 Hz
95 - 264 VAC
47 - 63 Hz
95 - 264 VAC
47 - 63 Hz
Page 10 of 25
Output Voltage
12 VDC
12 VDC
24 VDC
Commercial Units Outlet & Breaker (Amps)
20 (no more than 10 bikes per breaker)
12 (no more than 10 bikes per breaker)
Output Current
3 A
5 A
3.5 A
Hide quick links:
Advertisement
Table of Contents
