CYBEX 530C Owner's Manual

CYBEX 530C Owner's Manual

Cardiovascular systems

Advertisement

Cybex 530C and 530R
Cycle Owner's Manual
Cardiovascular Systems
Part Number LT-18171-4 Rev H
www.cybexinternational.com

Advertisement

Table of Contents
loading

Summary of Contents for CYBEX 530C

  • Page 1 Cybex 530C and 530R Cycle Owner’s Manual Cardiovascular Systems Part Number LT-18171-4 Rev H www.cybexinternational.com...
  • Page 3 Cycle Owner’s Manual Cardiovascular Systems Part Number LT-18171-4 Rev H Cybex ® and the Cybex logo are registered trademarks of Cybex International, Inc. Polar® is a registered trademark of Polar Electro Inc. DISCLAIMER: Cybex International, Inc. makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes.
  • Page 5: About This Manual

    • order online at www.cybexinternational.com • fax your order to 508-533-5183 • contact Cybex Customer Service at 888-462-9239 or 508-533-4300 To contact Cybex with comments about this manual you may send an email to techpubs@cybexintl.com. FCC Compliance Information ! WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the...
  • Page 6: Declaration Of Conformity

    Cybex 530C and 530R Owner’s Manual November 15, 2007 DECLARATION OF CONFORMITY This Declaration of Conformity is suitable to the European Standard EN 45014, “General criteria for supplier’s declaration of conformity.” Manufacturer: EU Representative: Cybex International, Inc. Cybex International UK...
  • Page 7 Cybex 530C and 530R Owner’s Manual As a result of test reports and their evaluation by accredited laboratories, we are in possession of the following certificates for products which carry this marking: Canada, USA CAN/CSA-C22.2 No.68-92, CAN/CSA-C22.2 No.601.1- M90, UL Std. No. 1647, FCC...
  • Page 8 Cybex 530C and 530R Owner’s Manual EN 61000-4-11 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests EN 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emis- sions (equipment input current <= 16A per phase)
  • Page 9: Table Of Contents

    Detailed Operation Guide ... . 3-3 Parts List - Cybex 530C ... . . 6-4 Stopping the 530 Cycle ....3-6 Parts List - Cybex 530R .
  • Page 10 Cybex 530C and 530R Owner’s Manual This page intentionally left blank. Page vi...
  • Page 11: Safety

    The power requirement for the optional power adapter is 100-240 V, 50/60 Hz, 1.0A AC. NOTE: Use Cybex supplied adapter only, NEMA 5-15 plug (TR-18231) or IEC-320 inlet (TR-18230).
  • Page 12 • Do not attempt repairs, electrical or mechanical. Seek qualified repair personnel when servicing. If you live in the USA, contact Cybex Customer Service at 888-462-9239. If you live outside the USA, contact Cybex Customer Service at 508-533-4300. •...
  • Page 13: Warning Decals

    NOTE: To replace any worn or damaged decals do one of the following: Visit www.cybexinternational.com to shop for parts online, fax your order to 508-533-5183 or contact Cybex Customer Service at 888-462-9239. If you live outside of the USA, call 508-533-4300. Warning Decals - A/V Option...
  • Page 14: Warning Decals - 530C Cycle

    Warning Decals - 530C Cycle Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury. The warning decals used on the Cybex 530C Cycle are shown below. SERIOUS INJURY COULD OCCUR WARNING...
  • Page 15 4. DO NOT use the unit if you exceed 400 lbs. (180 kg). This is the rated maximum user weight. 5. Report any malfunctions, damage or repairs to the facility. 6. Replace any warning labels if damaged, worn or illegible. Input 9v/1.7A DC. Use Cybex supplied adapter only. NEMA 5-15 (TR-18231) or IEC-320 (TR-18230) DE-18186-4 Warning decal...
  • Page 16 Cybex 530C and 530R Owner’s Manual Warning decal part number DE-18363-4 WARNING Hot Flywheel! Wait until it cools before servicing DE-18363-4 NOTE: This decal is located inside the cycle, applied to the brake/generator. Safety Page 1-6...
  • Page 17 Cybex 530C and 530R Owner’s Manual WARNING SERIOUS INJURY COULD OCCUR IF THESE PRECAUTIONS ARE NOT OBSERVED 1. Read and understand the Owner's Manual and all warnings posted on the unit before using. 2. Use only NiMH (Nickel-Metal Hydride) batteries.
  • Page 18: Warning Decals - 530R Cycle

    Warning Decals - 530R Cycle Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury. The warning decals used on the Cybex 530R Cycle are shown below. SERIOUS INJURY COULD OCCUR WARNING...
  • Page 19 4. DO NOT use the unit if you exceed 400 lbs. (180 kg). This is the rated maximum user weight. 5. Report any malfunctions, damage or repairs to the facility. 6. Replace any warning labels if damaged, worn or illegible. Input 9v/1.7A DC. Use Cybex supplied adapter only. NEMA 5-15 (TR-18231) or IEC-320 (TR-18230) DE-18186-4 Warning decal...
  • Page 20 Cybex 530C and 530R Owner’s Manual Warning decal part number WARNING DE-18363-4 Hot Flywheel! Wait until it cools before servicing DE-18363-4 Safety Page 1-10...
  • Page 21 Cybex 530C and 530R Owner’s Manual WARNING SERIOUS INJURY COULD OCCUR IF THESE PRECAUTIONS ARE NOT OBSERVED 1. Read and understand the Owner's Manual and all warnings posted on the unit before using. 2. Use only NiMH (Nickel-Metal Hydride) batteries.
  • Page 22: Csafe Ports

    NOTE: The CSAFE port inside the console, accessible through the rear battery door, is the only port in the Cybex cycle that carries BOTH the CSAFE communication lines AND the 8.0v DC CSAFE power supply. If you are attaching a CSAFE compliant device that requires power, you MUST use this connection.
  • Page 23: Explanation Of Symbols Used

    Explanation of Symbols Used Power adapter port - Diagram shows voltage polarity of plug used in the optional power adapter. Input 9v/1.7A DC. Use Cybex supplied adapter only. Class II Equipment - Classifies equipment as Class II with double insulation.
  • Page 24 Cybex 530C and 530R Owner’s Manual This page intentionally left blank Safety Page 1-14...
  • Page 25 400 lbs. (181 kg). Power: Self-powered or optional AC adapter for full time display. Connectivity: CSAFE, Cybex Programming Advantage with “One Shot” custom programming Power Supply: 100-240 V, 50/60 Hz, 1.0 A, AC (9V DC, 1.7A). NEMA 5-15 plug (TR-18231) or IEC-320 inlet (TR-18230).
  • Page 26: Technical Specifications Specifications

    Cybex 530C and 530R Owner’s Manual This page intentionally left blank Technical Specifications Page 2-2...
  • Page 27: Operation

    Cybex 530C and 530R Owner’s Manual 3 - Operation Read and understand all instructions and warnings prior to using the unit. See all of the safety related information located in Chapter 1. NOTE: Standard units contain a Pause/end key. See Figure 1A. Total access units contain a Stop key.
  • Page 28: Intended Use

    Cybex 530C and 530R Owner’s Manual Intended Use The intended use of this exercise equipment is to aid or improve general physical fitness and exercise. For Household or Commercial use. 530C Cycle 530R Cycle Operation Page 3-2...
  • Page 29: Quick Operation Guide

    Cybex 530C and 530R Owner’s Manual Quick Operation Guide NOTE: Maximum user weight is 400 lbs. (181 kg). The following is a quick overview of the operation of the unit. For more information read Detailed Operation Guide in this chapter.
  • Page 30 Cybex 530C and 530R Owner’s Manual NOTE: Press Enter after each adjustment. 5. The unit begins with a long tone. Depending on which program and level you selected, the resistance will begin to increase. 6. Observe the four displays (See Figure 1A or 1B): The lower left display shows the workout time.
  • Page 31 Cybex 530C and 530R Owner’s Manual Statistics or Profile adjustable settings 1. Choose 2. Complete Program Setup Manual Time control Heart Rate Enter Scan Bike Fitness Level programs programs Speed Target Fitness Dist METs Watts Cal/Hr Weight test programs Quick...
  • Page 32: Stopping The 530 Cycle

    Cybex 530C and 530R Owner’s Manual Stopping the Cybex 530 Cycle Press Pause/end(Stop) once to pause your workout for 20 seconds (default setting) and to enter the Workout Review. As you stop pedaling and come to a complete stop all workout settings and data will remain in memory for the pre-selected time.
  • Page 33: Data Readouts

    Cybex 530C and 530R Owner’s Manual Data Readouts As you exercise, the Cybex 530 Cycle keeps track of the following data: Distance - The total accumulated distance, in miles or kilometers, during your workout. NOTE: Depending on the defaults you’ve chosen this measurement will dist show in English or Metric.
  • Page 34: Displaying Heart Rate

    Cybex 530C and 530R Owner’s Manual To review accumulated data after a program: The display automatically cycles through your accumulated workout data during the Workout Review for 20 seconds (default setting). Displaying Heart Rate In order to display your heart rate, you must either use a Polar compatible heart rate transmitter belt (not included) or hold the handgrips to use Contact Heart Rate.
  • Page 35: Use Of Programs

    Cybex 530C and 530R Owner’s Manual Blue = 0-69 beats per minute (RESTING ZONE) Heart LED Green = 70-93 beats per minute (WARM-UP ZONE) The color of the heart Yellow = 94-120 beats per minute (FAT BURN ZONE) indicates the range of...
  • Page 36: Manual Mode

    Cybex 530C and 530R Owner’s Manual Manual Mode Overview Manual Mode is available both through Quick Start and through the Manual program where it includes the program time and user weight adjustment. Manual Mode is not a preprogrammed workout. Instead, it allows you to choose setting as you workout.
  • Page 37: The Workout Profile

    Cybex 530C and 530R Owner’s Manual The Workout Profile The Workout Profile matrix in the center of the display uses columns of lights to show the progress of your workout. The height of the column represents Watts, specifically the highest Watts you reached in that period.
  • Page 38: Meaning Of Isokinetic

    Not only is this feature ideal for increasing muscular strength, but in rehabilitation applications it makes exercise extremely safe and comfortable. Programs The Cybex 530 Cycles employ three groups of programs: 1. Bike Programs 2. Fitness Programs 3.
  • Page 39: Heartrate Control

    Cybex 530C and 530R Owner’s Manual HR Control Program Overview The Heart Rate Control program is interactive. By selecting a predetermined heart rate, the cycle will adapt the resistance to keep the users heart rate at that level. The cycle increases the resistance if the user slows, and decreases the resistance if the user speeds up, to maintain constant power as it attempts to meet and hold your target heart rate.
  • Page 40: Bike - Hills

    Cybex 530C and 530R Owner’s Manual Bike - Hills Program Overview The Hills program is designed to give the user the experience of riding in a hilly terrain. This program uses intervals of moderate resistance to simulate relatively flat areas and intervals of substantially greater resistance to simulate steeper grades.
  • Page 41: Bike - Rolling Hills

    Cybex 530C and 530R Owner’s Manual Bike - Rolling Hills Program Overview The Rolling Hills program is designed to give the user the experience of riding in a hilly terrain. Very similar to the Hills program with more time spent at each level. This program uses intervals of moder- ate resistance to simulate relatively flat areas and intervals of substantially greater resistance to simulate steeper grades.
  • Page 42: Bike - Pikes Peak

    Cybex 530C and 530R Owner’s Manual Bike - Pikes Peak Program Overview The Pikes Peak program begins with a modest level of resistance and then gradually ramps to its peak and then remains at that level for 45 seconds before ramping back down to its beginning level. See Figure 6.
  • Page 43: Fitness - Interval

    Cybex 530C and 530R Owner’s Manual Fitness - Interval Program Overview The Interval program utilizes a 1:2 (work:rest) ratio with the work period lasting for 30 seconds. This allows for moderate and balanced taxation of both the aerobic and anaerobic energy systems. As such this program is useful to those who desire improving both their aerobic and anaerobic capabilities.
  • Page 44: Fitness - Weight Loss

    Cybex 530C and 530R Owner’s Manual Fitness - Weight Loss Program Overview The Weight Loss program is designed for low to medium intensity training that the user can sustain for an extended period of time. It builds from a low intensity baseline to include segments of higher resistance.
  • Page 45: Fitness - Cardio

    Cybex 530C and 530R Owner’s Manual Fitness - Cardio Program Overview The Cardio program is designed for experienced users that desire a high intensity cardiovascular training experience. The two-minute work interval with high resistance ensures that the aerobic energy system is completely taxed, while the subsequent two-minute rest interval allows for recovery enabling a repeat at the higher work rate.
  • Page 46: Speed - Strength

    Cybex 530C and 530R Owner’s Manual Speed - Strength Program Overview The Strength program is designed with the specific goal of taxing the anaerobic energy system and encouraging maximal power development. This program uses a 1:3 (work:rest) ratio using 15 second intervals.
  • Page 47: Speed - Steady

    Cybex 530C and 530R Owner’s Manual Speed - Steady Program Overview The Steady program is designed to encourage the user to pedal at a steady state with the predetermined level at the selected speed. See Figure 11. Steady Repeating segment...
  • Page 48: Speed - Ramps

    Cybex 530C and 530R Owner’s Manual Speed - Ramps Program Overview The Ramps program is designed to encourage the user to work progressively towards their anaero- bic energy system. The Speed program mode will allow the user to maintain pedal speed as the user fatigues.
  • Page 49: Preventive Maintenance

    NOTE: Worn or damaged components shall be replaced immediately or the unit removed from service until the repair is made. NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your unit. Instruct all personnel in equipment inspection and maintenance actions and also in accident reporting/recording.
  • Page 50: Cleaning Your 530 Cycle

    Cybex 530C and 530R Owner’s Manual Cleaning Your Cybex 530 Cycle ! WARNING: To prevent electrical shock, be sure that the unit is unplugged from the electrical outlet before performing any cleaning or maintenance procedures. When cleaning your unit spray a mild cleaning agent, such as a water and dish soap solution, on a clean cloth first and then wipe the unit with the damp cloth.
  • Page 51: Drive Belt Maintenance

    Cybex 530C and 530R Owner’s Manual Drive Belt Maintenance There are two drive belts that may become worn or cracked. See Figure 2. Primary Belt - This is the wider of the two belts. It has ten ribs that keep it aligned on the large Primary drive pulley.
  • Page 52 Cybex 530C and 530R Owner’s Manual 4. Remove the access covers. Front A. Using a Phillips head screwdriver, remove the three screws securing the front cap in place. See Figure 4. B. Remove the front cap. C. Remove the six screws securing the top cap in place.
  • Page 53 Cybex 530C and 530R Owner’s Manual Cybex 530C Cycle, Primary and Secondary Drive Belts F. Locate Primary and Secondary Drive Belts. See Figures 6 and 7. Primary Drive Belt Figure 6 Secondary Drive Belt Figure 7 Preventive Maintenance Page 4-5...
  • Page 54 Cybex 530C and 530R Owner’s Manual Cybex 530R Cycle 5. Remove the crank arms. A. Using a 6 mm Allen wrench, remove the two screws and washer securing each of the crank arms. See Figure 8. Drive Sprocket Hole Washer...
  • Page 55 Cybex 530C and 530R Owner’s Manual B. Remove the front cap. C. Remove the four screws securing the top cap in place. Remove top cap. See Figure 10. D. Remove the seven screws securing the right cover in place. Remove right cover. See Figure 10.
  • Page 56 Cybex 530C and 530R Owner’s Manual Cybex 530R Cycle, Primary and Secondary Drive Belts F. Locate Primary and Secondary Drive Belts. See Figures 11 and 12. Primary Drive Belt Figure 11 Secondary Drive Belt Figure 12 Preventive Maintenance Page 4-8...
  • Page 57 Cybex 530C and 530R Owner’s Manual ! WARNING: The flywheel may be hot. Wait until it cools before servicing. 7. Check the condition of each belt. A. Rotate each belt by slowly turning pulleys backwards. NOTE: Be careful to not pinch your fingers between belts and pulleys.
  • Page 58: Environment

    Cybex 530C and 530R Owner’s Manual 8. Check the tension of the primary belt. A. The primary drive belt tension is self adjusting. Check the tension arm and spring for movement and tension. 9. Check the tension of the secondary belt.
  • Page 59: Rechargeable Batteries

    The batteries will also be charged when the optional power adapter is plugged in. Battery Replacement - The Cybex 530 Cycles use five AA 1.2v 1600mAh or higher NiMH (Nickel-Metal Hydride) batteries. See Figure 16.
  • Page 60 Cybex 530C and 530R Owner’s Manual Dispose of used batteries appropriately. Remove the batteries if storing the unit for periods in excess of six months. The batteries are located in the console. They can be accessed by removing a Phillips head screw from the back cover with a Phillips head screwdriver.
  • Page 61: Setup And Assembly

    Cybex 530C and 530R Owner’s Manual 5 - Setup and Assembly Warnings All warnings listed in this chapter are as follows: ! WARNING: Use extreme caution when assembling the unit. Failure to do so could result in injury. ! WARNING: Always use proper lifting methods when moving heavy items.
  • Page 62: Electrical Power Requirements

    The power requirement for the optional power adapter is: 100-240 V, 50/60 Hz, 1.0A AC. NOTE: Use Cybex supplied adapter only, NEMA 5-15 plug (TR-18231) or IEC-320 inlet (TR-18230). If using the IEC-320 inlet adapter, ensure a proper power cord is sourced and connected properly.
  • Page 63 C. Check to be sure that the following items are present. Check off ( ) each item as you find it. See Figure 1. If any of the parts are missing contact Cybex Customer Service. Cybex 530C Cycle Assembly Item...
  • Page 64 Cybex 530C and 530R Owner’s Manual D. Check off ( ) each item in the hardware pack as you find it. See Figure 2. Item Part Number Description HS-18183 Screw, 5-16-18 X .75, SHCS (Socket Head Cap Screw) HW-53018 Washer, 5-16” Split HS-15706 Screw, 8-16 x .50, PNHD...
  • Page 65 Use proper lifting methods. Ground Wire 5. Attach the Console Assembly to Upright Tube. NOTE: If attaching the A/V option, refer to the 530C and 530R A/V bracket installation instructions (supplied with the A/V bracket). A. Locate the console assembly (#2), upright tube Upper (#4), four mounting screws 5-16-18 X 1.25...
  • Page 66 Cybex 530C and 530R Owner’s Manual B. Locate the upper display cable and plug it into the lower display cable in the main frame assembly. See Figure 5. Upper C. Locate the upper ground cable and plug it into Ground...
  • Page 67 See Figure 9. NOTE: Use Cybex supplied adapter only, NEMA 5-15 plug (TR-18231) or IEC-320 inlet (TR-18230). If using the IEC-320 inlet adapter, ensure a proper power cord is sourced and connected properly.
  • Page 68 1. Unpack and verify contents of the unit. A. Check to be sure that the following items are present. Check off ( ) each item as you find it. See Figure 1. If any of the parts are missing contact Cybex Customer Service. Item Part Number...
  • Page 69 Cybex 530C and 530R Owner’s Manual B. Check off ( ) each item in the hardware pack as you find it. See Figure 2. Item Part Number Description HS-18183 Screw, 5-16-18 X .75, SHCS (Socket Head Cap Screw) HW-53018 Washer, 5-16” Split HS-15706 Screw, 8-16 x .50, PNHD, BLK...
  • Page 70 A. Remove the four long screws securing the top cap in place. Remove top cover. See Figure 3. 4. Attach the Console Assembly. NOTE: If attaching the A/V option, refer to the 530C and 530R A/V bracket installation instructions (supplied with the A/V bracket).
  • Page 71 Cybex 530C and 530R Owner’s Manual D. Lower the console assembly over the upper display cable and hold it steady in the correct position on the base assembly. See Figure 6. NOTE: Confirm that no cables are pinched lowering the console.
  • Page 72 See Figure 10. NOTE: Use Cybex supplied adapter only, NEMA 5-15 plug (TR-18231) or IEC-320 inlet (TR-18230). If using the IEC-320 inlet adapter, ensure a proper power cord is sourced and connected properly.
  • Page 73: Testing The Operation

    Electrical Requirements in this chapter. NOTE: Coil up the remainder of the power cord and place it out of the way. See Figure 1. NOTE: Cybex recommends that the unit be unplugged when not in use. NOTE: Power adapter IEC-320 (TR-18230) is not supplied with additional power cord. Additional power cord plug varies per country.
  • Page 74: Setting Operation Options

    Cybex 530C and 530R Owner’s Manual Setting Operation Options 1. Enter Test Mode by holding down Pause/end(Stop) key for three seconds while pedaling the unit or plugging in the optional power adapter. The display will read “bike”. NOTE: After changing any value, you must press Enter to save that value. When you press enter the display will read “updt”...
  • Page 75: Customer Service

    Serial Number Your serial number can be found on the front end of the unit, See Figure 1. For your convenience record your serial number below so that you will have it ready if you call Cybex Customer Service. Serial Number...
  • Page 76: Return Material Authorization (Rma)

    Figure 1. The serial number begins with a letter, for example: R09-101331100. 4. At Cybex’s discretion, the technician may request that you return the problem part(s) to Cybex for evaluation and repair or replacement. The technician will assign you an RMA number and will send you an ARS label.
  • Page 77: Damaged Parts

    Cybex 530C and 530R Owner’s Manual Damaged Parts Materials damaged in shipment should not be returned for credit. Shipping damages are the responsibility of the carrier (UPS, Federal Express, trucking companies, etc.). Apparent Damage - Upon receipt of your shipment, check all boxes carefully. Any damage seen with a visual check must be noted on the freight bill and signed by the carrier’s agent.
  • Page 78: Parts List - Cybex 530C

    Cybex 530C and 530R Owner’s Manual Parts List Cybex 530C Cybex ITEM PART NO. DESCRIPTION AD-17885 PCA, CONTROLLER, HYBRID BRAKE AF-18164 PLATE, POWER JACK COVER AD-17886-Q PCA, I/O BOARD AD-18456-Q PCA, I/O BOARD, A/V OPTION AX-18105 ASSY, IDLER, RIGHT AX-18106...
  • Page 79 Cybex 530C and 530R Owner’s Manual ITEM PART NO. DESCRIPTION HS-12031 SCREW SEMS, 10-32 X .62”, PNHD PHIL HX-18017 BUMPER, .5 X .14”, HIGH, BLACK HX-18024 SPRING, EXTENSION, .75 X .115 X 7”, Silver HX-18039 SPRING EXTENSION, .50” X .080 X 7., Silver...
  • Page 80 Cybex 530C and 530R Owner’s Manual ITEM QTY PART NO. DESCRIPTION PL-18078 CONSOLE, REAR PLASTIC SW-17887-4 MEMBRANE, 530, TOP, ENGLISH SW-20703-4 MEMBRANE, 530, TOP, ENGLISH, IFI SW-18273-4 MEMBRANE, 530, BTM, W-0 AV, ENGLISH SW-20702-4 MEMBRANE, 530, BTM, W-0 AV, ENGLISH, IFI...
  • Page 81: Parts List - Cybex 530R

    Cybex 530C and 530R Owner’s Manual Parts List Cybex 530R Cybex ITEM PART NO. DESCRIPTION AD-17885 PCA, CONTROLLER, HYBRID BRAKE AD-17886-Q PCA, I/O BOARD AD-18456-Q PCA, I/O BOARD, A/V OPTION AF-18164 PLATE, POWER JACK COVER AX-17564 ASSY, SEAT SHUTTLE AX-62031...
  • Page 82 Cybex 530C and 530R Owner’s Manual ITEM PART NO. DESCRIPTION PL-18235 CAP, FRONT, UNIVERSAL HX-18287 PLUG, HOLE, PLASTIC 1”, BLACK HX-18180 GRIP, HANDRAIL AX-18377 ASSY, EDDY CURRENT BRAKE W-GENERATOR PL-05044 MOLDED FOOT GUIDE, B-060 HS-15763 BOLT, 1/4-20 X .375”, FLAT HEAD, NYLOCK HW-43042 WASHER, HDS-8, 5/16”...
  • Page 83 Cybex 530C and 530R Owner’s Manual ITEM PART NO. DESCRIPTION HS-18311 SCREW, 8-16 X .75”, PNHD PHIL, STL, BLK AW-18160 CABLE, CONSOLE HARNESS, 530R AW-18365 CABLE, GROUND, UPPER, 530R AF-18104 BRKT, SPRING TENSIONER, RIGHT HB-18056 BUSHING, FLANGE, .375 X .469 X .25”...
  • Page 84 Cybex 530C and 530R Owner’s Manual ITEM PART NO. DESCRIPTION HS-41107 BOLT, 5/16-18 X 1.5”, BTHD, SST, BLK PD-18177 SEAT BACK, 530R DE-18243 LABEL, CYBEX DE-18281 DECAL, MODEL NAME, 530R SK-18450 FAN, 92 X 25 MM, 12V HS-18320 SCREW, 6-19 X 1/2”, PNHD PHIL, ZN...
  • Page 85 AC-18234, (Upright Cycle) only CONSOLE ASSEMBLY INCLUDES DECALS BRAKE ASSEMBLY INCLUDES DECALS INCLUDES DECAL, SEAT PAD AND HARDWARE CRANK ASSEMBLY Bearing Housing INCLUDES Part of Frame Weldment DECALS SEE CRANK ASSY. DETAIL Customer Service Cybex 530C and 530R Service Manual Page 6-11...
  • Page 86 ASSY. DETAIL DECALS SEE CONSOLE ASSY. DETAIL INCLUDES DECALS IFI SEAT ASSEMBLY INCLUDES DECALS CRANK ASSEMBLY Bearing Housing Part of Frame Weldment SEE BRAKE ASSY. DETAIL SEE CRANK ASSY. DETAIL Customer Service Cybex 530C and 530R Service Manual Page 6-12...
  • Page 87 A/V MONITOR CP-20794 ATSC/NTSC CP-20665 SECAM/PAL Service Cybex 530C and 530R Owner’s Manual Cybex C Schematic Page 6-13...
  • Page 88 A/V MONITOR CP-20794 ATSC/NTSC CP-20665 SECAM/PAL Service Cybex R Schematic Cybex 530C and 530R Owner’s Manual Page 6-14...

This manual is also suitable for:

530r

Table of Contents