Table of Contents
Advertisement
To select an Input Source:
1.
Press INPUT on the remote control, press the setting button
panel, or press the
Settings menu.
2.
Press
/ / /
PC source will only display when the slot-in computer is connected.
3.
Press ENTER on the remote control, or touch the input source.
4.
Press EPG/BACK on the remote control, or touch a blank area outside of the
menu to exit.
the highlighted input source.
setting icon from the toolbar to display the Input
to select the input source you want.
touch the setting icon next to
41 41
on the front
Advertisement
Table of Contents
