Table of Contents
Advertisement
Quick Links
IFP52-1C Series
Commercial Touch Display
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website.
Model No. VS18786 | VS18789 | VS18791
P/N: IFP6552-1C | IFP7552-1C | IFP8652-1C
IFP6552-1CN | IFP7552-1CN | IFP8652-1CN
Advertisement
Table of Contents
Related Manuals for ViewSonic VS18786
Summary of Contents for ViewSonic VS18786
- Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
- Page 2 As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
-
Page 3: Safety Precautions
Do not place any heavy objects on the device or connection cables. • If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device. •... - Page 4 • Only use attachments/accessories specified by the manufacturer. • When a cart is used, use with caution when moving the cart/equipment combination to avoid injury from tipping over. • Disconnect the power plug from the AC outlet if the device is not being used for a long period of time.
- Page 5 • CAUTION: Immediately unplug your device from the wall outlet and refer servicing to a qualified service personnel under the following conditions: ͫ When the power supply cord or plug is damaged. ͫ If liquid has been spilled onto or objects have fallen into the unit. ͫ...
-
Page 6: Table Of Contents
Contents Safety Precautions ............3 Introduction .............. 10 Package Contents ....................10 Wall Mounting Specifications (VESA) ..............11 Product Overview ....................12 Front Panel ......................12 Rear Panel ......................12 Control Panel ......................13 I/O Panels ......................14 Remote Control ..................... 16 Using Gestures ...................... 19 Select and Deselect an Object (Clicking) ............ - Page 7 Using Your ViewBoard ..........28 Powering On/Off your ViewBoard ................28 Initial Launch Setup ....................29 vLauncher - Customizable Welcome Screen............31 vLauncher Message ....................31 Applications ......................32 Toolbar .........................34 On-Screen Display (OSD) Menu ................40 General Settings ....................41 Input Settings ......................42 Widget ........................
- Page 8 Input Source ......................70 Rename Input Source ..................71 Source........................ 72 App ........................73 APP ........................74 System ........................76 Clone to USB ...................... 77 Display ID ......................78 Security ......................79 System Update ....................82 About Device ..................... 83 Embedded Applications and Settings ......
- Page 9 RS-232 Protocol ............103 Description ......................103 RS-232 Hardware Specification ................103 LAN Hardware Specification ................104 RS-232 Communication Setting ................104 LAN Communication Setting ................104 Command Message Reference ................104 Protocol ......................105 Set-Function Listing ..................... 105 Appendix ..............110 Specifications ......................110 Display Modes ....................111 VGA Mode ......................
-
Page 10: Introduction
• Webcam Screws x 4 • Wall Mount Screws x 4 (M4x6mm x 2, M3x6mm x 2) (M8x25mm x 4) • Compliance Statement IFP6552-1C/7552-1C/8652-1C (VS18786/VS18789/VS18791) ViewBoard series IFP6552-1C/7552-1C/8652-1C (VS18786/VS18789/VS18791) Compliance Statement ViewBoard series IFP9850-4 VS18697 Commercial Touch Display Quick Start Guide... -
Page 11: Wall Mounting Specifications (Vesa)
Wall Mounting Specifications (VESA) NOTE: Please follow the instructions in the wall mount installation guide to install your wall mount or mobile mount bracket. If attaching to other building materials, please contact your nearest dealer. Model VESA Spec. (A x B) Standard Screw (C x D) Quantity IFP6552-1C Series... -
Page 12: Product Overview
Product Overview Front Panel Front I/O Control Panel Rear Panel... -
Page 13: Control Panel
Control Panel Number Item Description Ambient Light Sensor to monitor the ambient light Remote control receiver • Power indicator light • Press the key to turn on the device • Press the key to turn off/on the display backlight only •... -
Page 14: I/O Panels
I/O Panels HDMI 1 TOUCH 1 HDMI OUT RS232 AUDIO IN SPDIF... - Page 15 (See TOUCH 1) TOUCH 3 NOTE: For use with the HDMI 4 and VGA ports only. For ViewBoard channel and ViewSonic motorized trolly use only. Audio output to an external speaker/headset. AUDIO OUT Compatiable with LB-WIFI-001 and VB-WIFI-001 which are designed for ViewBoards and verified by ViewSonic.
-
Page 16: Remote Control
Remote Control Number Description Power on/off Screen capture Startup writing Back to the ViewBoard player Home Screen Back/Return to the previous page Increase/Decrease the Volume Number Keypad Information Input source selection Media control buttons: • Red: Play/Pause • Green: Stop •... - Page 17 Inserting Remote Control Batteries To insert batteries into the remote control: 1. Remove the cover on the rear of the remote control. 2. Insert two “AAA” batteries, ensuring the “+” symbol on the battery matches the “+” on the battery post. 3.
- Page 18 Remote Control Receiver Range The working range of the remote control is shown here. It has an effective range of ° 4 meters, 30 degrees left and right. Ensure there is nothing obstructing the remote control’s signal to the receiver. 30°...
-
Page 19: Using Gestures
Using Gestures Touch gestures allow the user to use pre-determined commands without using a keyboard or mouse. Using gestures on the ViewBoard, the user can select/deselect objects, change the location of an object, access settings, erase digital ink, and much more. Select and Deselect an Object (Clicking) Press and release the ViewBoard to select/deselect options or objects. -
Page 20: Moving An Object
Moving an Object Press and hold the object on the ViewBoard and slowly drag it with your finger to your desired location. Erasing Digital Ink Use your flattened hand, palm, or fist on the ViewBoard and move your hand across the area which you wish to erase. -
Page 21: Making Connections
Making Connections Connecting External Devices and Touch Connection Type-C Cable USB Cable TOUCH HDMI Cable HDMI Computer USB Cable TOUCH VGA Cable 21 21... -
Page 22: Usb Type-C Connection
Your external device(s) can be connected in any of the following configurations: USB Type-C Connection To connect via USB Type-C: Connect a USB Type-C cable from your external device to the Type-C port on the ViewBoard. HDMI Connection To connect via HDMI: 1. -
Page 23: Rs-232 Connection
RS-232 Connection Serial Port Cable RS-232 Computer When you use a RS-232 serial port cable to connect your display to an external computer certain functions can be controlled remotely by the PC, including Power On/Off, Volume adjustment, Input select, Brightness, and more. -
Page 24: Usb And Networking Connections
USB and Networking Connections Just like any PC, it is easy to connect various USB devices and other peripherals to your ViewBoard. USB Peripherals Plug the USB device cable into the USB port. USB Cable USB Device Networking and Modem cables Plug the network cable into the LAN port. -
Page 25: Media Player Connection
Media Player Connection HDMI Media Player HDMI Cable To connect to a media player: 1. Connect the HDMI cable to the HDMI ports on your ViewBoard and peripheral device. Plug in the power cord of your ViewBoard, and turn on the power supply switch. Power button on the right-hand side of the ViewBoard to turn the Press the screen on. -
Page 26: Spdif Connection
SPDIF Connection Optical Cable SPDIF Power amplifier / Stereo equipment To connect to an external sound system: 1. Connect an optical cable from the SPDIF port to your sound system’s optical connector. Plug in the power cord of your ViewBoard, and turn on the power supply switch. Press the Power button on the right-hand side of the ViewBoard to turn the screen on. -
Page 27: Video Output Connection
Video Output Connection HDMI Cable HDMI OUT Projector To output video via a display device: 1. Connect an HDMI cable to the HDMI IN port of your display device, and the other end to the HDMI OUT port of your ViewBoard. Plug in the power cord of your ViewBoard, and turn on the power supply switch. -
Page 28: Using Your Viewboard
Using Your ViewBoard Powering On/Off your ViewBoard 1. Ensure the power cord is connected, plugged into a power outlet, and the power switch is in the “On” position. NOTE: The AC IN socket and Power Switch are located at the bottom of the device. -
Page 29: Initial Launch Setup
Initial Launch Setup When you first turn on your ViewBoard, an initial setup wizard will launch. 1. Select your Language: 2. Setup and verify your LAN connection: 29 29... - Page 30 3. Select your Time Zone to set the Date and Time: 4. Select your preferred System Mode: 5. Accept or Decline the Privacy and Copyright Protection Terms. 30 30...
-
Page 31: Vlauncher - Customizable Welcome Screen
vLauncher - Customizable Welcome Screen vLauncher Message Both the vLauncher Title and Subtitle can be customized by tapping on them. 31 31... -
Page 32: Applications
Additionally, a password can be set by tapping on Set Password. Applications Installed applications can all be found on the welcome screen. To view all applications tap on the Down Arrow. 32 32... - Page 33 To hide the application drawer tap the Up Arrow. To add a shortcut to an application, tap, hold, and drag up the icon. To remove an application shortcut, tap, hold, and drag the icon down. 33 33...
-
Page 34: Toolbar
Toolbar Toolbar trigger icons are on the edge of the ViewBoard launcher providing access to your tools. To launch a tool: 1. Tap a Toolbar trigger icon. 2. Tap on your desired tool icon. NOTE: The default toolbar setting is to be available for all input sources; however, users can go to: Settings >... - Page 35 Description Icon Return to the previous operation screen. NOTE: Only for the Embedded Player source. Back Return to the Home Screen of the Embedded Player. Home Display all embedded applications that are currently being used. Recent View all installed applications. Launch the Whiteboard software.
- Page 36 Description Icon Access the pen, highlighter, clear, and save options. Highlighter Eraser Undo Redo Clean Save Exit Annotate the overlay of any input source with black, white, yellow, orange, red, pink, green, or blue ink. NOTE: The default pen setting supports up to 10-point writing. Highlighter Mark and highlight with yellow, grey, gold, orange, red, pink, green or blue ink.
- Page 37 Description Icon View more applications within the ViewBoard tool bar. Screen Freeze Spotlight Stopwatch Timer Hide/Unhide Screen Capture Screen Freeze Convert the currently displayed content into a still image; then you can zoom in, zoom out, go back to full screen, and exit. Zoom in Zoom out Fullscreen...
- Page 38 Description Icon Stopwatch Tapping Start will initiate the stopwatch. At any time, the stopwatch can be paused, resumed, split, or reset. Timer More Access the countdown timer with an optional alarm setting. Touch and swipe to adjust the numeric values, then click Start. At any time, the countdown timer can be paused, resumed, or reset.
- Page 39 Description Icon Screen Capture Take a screenshot of the current screen. More Access the General Settings. Settings 39 39...
-
Page 40: On-Screen Display (Osd) Menu
On-Screen Display (OSD) Menu Access General Settings, Input Settings, and Widgets through the OSD Menu. ViewBoard has two options for opening the OSD Menu: Option 1 Long press anywhere in the vLauncher background. Option 2 Press the INPUT button on the remote control. 40 40... -
Page 41: General Settings
General Settings To adjust the Backlight: Press INPUT on the remote control or long press the vLauncher background and touch General on-screen (if needed) to display the General Settings menu. Drag the brightness slider directly to adjust the backlight value, and/or touch On or Off to enable/disable the function. -
Page 42: Input Settings
Input Settings To select an Input Source: Press INPUT on the remote control, press the setting button on the front setting icon from the toolbar to display the Input Settings panel, or press the menu. Press to select the input source you want. q/p/t/u NOTE: ... -
Page 43: Widget
Widget NOTE: Only available for the ViewBoard Player source. To add a widget to the vLauncher welcome screen: 1. Long press the vLancher background via touch to launch the OSD Menu. 2. Select Widget. 3. Touch and hold the desired widget. 4. -
Page 44: Settings - Hdmi & Vga Input Source
Settings - HDMI & VGA Input Source Press MENU on the remote control or select the setting icon next to the input source in Input Settings to launch the Settings menu. Settings include: Audio, Screen, Display, and Adjust. Audio Settings 1. -
Page 45: Screen Settings
Screen Settings 1. Press q on the remote control and select the Screen menu. 2. Press q/p/t/u on the remote control or directly touch the option to select it. 3. Adjust your preference by touching each value directly, or with the remote control by pressing 4. -
Page 46: Display Settings
Display Settings 1. Press q on the remote control and select the Display menu. 2. Press q/p/t/u on the remote control or directly touch the option to select it. 3. Adjust the Brightness, Contrast, Hue, and Sharpness directly by touching and adjusting each value, or with the remote control by pressing to adjust the option. -
Page 47: Low Blue Light Filter And Eye Health
Low Blue Light Filter and Eye Health The Blue Light Filter blocks high-energy blue light for a more comfortable viewing experience. NOTE: To meet TÜV Rheinland low blue light certification, the Display Settings must be: • Mode: Standard (Brightness and Contrast are 50) •... - Page 48 Eye and Neck Exercises Eye Exercises Eye exercises can help minimize eye strain. Slowly roll your eyes to the left, right, up, and down. Repeat as many times as needed. Exercises for the eyes (1) Keep the body and the (2) Move the eyes le and (3) Move the eyes to look head upright.
-
Page 49: Adjust Settings - (Vga Only)
Adjust Settings - (VGA Only) 1. Press q on the remote control and select the Adjust menu. 2. Press q/p/t/u on the remote control or directly touch the option to select it. 3. Adjust your preference by touching each value directly, or with the remote control by pressing 4. -
Page 50: Settings - Viewboard Player
Settings - ViewBoard Player When the ViewBoard is in the ViewBoard Player input source, press on the remote control or tap the setting icon next to the input source in the On-Screen Display (OSD) Menu’s Input Settings to enter the Settings menu. Wireless &... -
Page 51: Wi-Fi
Wi-Fi Setup and manage wireless access points. • Tap the toggle button to turn Wi-Fi On or Off. • Once On, you can: Add a Network, view Saved Networks, Refresh the network list, or view Advanced settings. • In Advanced settings, you can toggle Network notifications On or Off and view Network card info. -
Page 52: Ethernet
Ethernet Set the local network and proxy. • Tap the drop down menu to connect/disconnect the Ethernet. • You can adjust Local network and Proxy settings as well. 52 52... -
Page 53: Wireless Hotspot
Wireless Hotspot Set and share my internet connection with other devices. • Tap the toggle button to turn Wireless hotspot On or Off. • Tap Set up to set the Network name, Security, and Password. 53 53... -
Page 54: Vpn
Setup and manage Virtual Private Networks. To create a VPN profile: 1. Go to: Settings > Wireless & Network > VPN and tap Add VPN. 2. Key in the Name. 54 54... - Page 55 3. Select the VPN Type. 4. Choose to enable/disable PPP encryption (MPPE) and/or show Advanced options. 55 55...
-
Page 56: Share
Share SAMBA The SAMBA Service provides file sharing via LAN. When the SAMBA Service is enabled, the user can explore the ViewBoard file system with a PC or mobile equipment. 1. To access, go to: Settings > Share > SAMBA. 2. - Page 57 5. Key in the user name and password, then select OK (if necessary). 6. After a successful log in, the ViewBoard files will be available. 57 57...
-
Page 58: Display
Display Adjust the Wallpaper, Theme, Protection, and HDMI Out settings. NOTE: The HDMI Out feature is only available on select models. 58 58... -
Page 59: Wallpaper
Wallpaper Users can change their wallpaper with default images (both still and live), or use their own by tapping My Photo and selecting the image file. 59 59... - Page 60 60 60...
-
Page 61: Protection
Protection Toggle HDCP & Copyright and set a Password for Screen Lock. • To set up a password for screen lock, tap Set Password and enter the desired password. 61 61... -
Page 62: Hdmi Out
HDMI Out Adjust the HDMI Out Resolution setting. NOTE: The HDMI Out feature is only available on select models. 62 62... -
Page 63: Preference
Preference View and adjust Touch, Language, Keyboard & Input, Date & Time, Boot Mode, Start up & Shut down, and Toolbar settings. 63 63... -
Page 64: Touch
Touch Adjust Touch Settings and toggle Touch Sounds On/Off. Language Adjust and choose the preferred language from the available languages. 64 64... -
Page 65: Keyboard & Input Method
Keyboard & Input Method Enable/disable the visual keyboard and/or change the default input method. • Tap on Settings to adjust the advanced keyboard settings. 65 65... -
Page 66: Date & Time
Date & Time Set the system time and format. Item Description When enabled, the ViewBoard will automatically synchronize the Automatic Date & Time date and time via the Internet. Time Zone Select the appropriate time zone. Choose from 12-hour or 24-hour time format. Simply toggle 24-hour Time Format format On/Off. -
Page 67: Boot Mode
Boot Mode Adjust the preferred boot up mode and set/reset a password. Item Description Normal Mode The embedded screen sharing Apps will run normally. Secured Mode The embedded screen sharing Apps will be removed. The system will automatically reboot, and then the Embedded OS Disable Embedded OS will not appear. -
Page 68: Startup & Shutdown
Startup & Shutdown Set the Startup Input, Standby Mode, EnergyStar Mode, Black Screen After Startup, Power off Reminder timer and Schedule settings. Item Description Startup Input Adjust the Startup Input preference. Display Setting when Decide what happens to the display when there is no signal for No Signal HDMI, PC, or VGA sources. -
Page 69: Toolbar Setting
Toolbar Setting Adjust the Side toolbar settings. 69 69... -
Page 70: Input Source
Input Source Adjust the input source names and settings, as well as the side tool bar settings. -
Page 71: Rename Input Source
Rename Input Source Set labels for each input source that will be easily recognized when displayed. 71 71... -
Page 72: Source
Source Toggle Wake up by active source, Signal auto search, and HDMI CEC and select Input port auto switch. Item Description Wake up by Active HDMI The screen will turn on automatically after plugging in an Input HDMI cable when the screen is off. When enabled, if the current source does not have a signal, the Auto Search Signal ViewBoard will automatically search for an input source. -
Page 73: App
The user can view App information and force stop, uninstall, clear data, clear cache, and clear defaults. NOTE: • Pre-loaded apps cannot be uninstalled. • Not all apps support Clear Defaults. 73 73... -
Page 74: App
View any running or installed applications. Tap on them for more detailed information and options. • By tapping on a running application, you can see more information, stop, or report the application. 74 74... - Page 75 • Selecting All, Download, or USB storage will list all installed applications. • Tapping on any application will display further information and options. 75 75...
-
Page 76: System
System View and adjust Storage, Security, System Update, and About device settings. 76 76... -
Page 77: Clone To Usb
Clone to USB Copy settings to an external USB drive. 77 77... -
Page 78: Display Id
Display ID Assign a number to remote control the display by RS-232/LAN. • To assign or change the Display ID, tap Change and input a number. NOTE: The Display ID is for RS-232 users, and the range is 01~99. 78 78... -
Page 79: Security
Security Review Certificate, Trusted Credential storage, and Unknown sources install settings. • Tap on Install certificate from storage to add additional certificates. 79 79... - Page 80 • Selecting Clear Credentials will remove all manually installed credentials. NOTE: Pre-loaded credentials cannot be cleared. • Under Trusted Credentials view and edit all trusted and installed CA certificates. • Tapping on a credential will provide more detailed information. 80 80...
- Page 81 • Allow the installation of applications from unknown sources by selecting the box under Unknown source security. NOTE: Apps from unknown sources may not be compatible or work properly. 81 81...
-
Page 82: System Update
System Update The ViewBoard automatically searches for software updates whenever connected to the Internet (OTA). With just one click, users can update their version of ViewBoard software. Item Description When the display is off, the system will automatically check for a new version. If a new version is found, the system will Auto Update automatically update. -
Page 83: About Device
About Device Display Embedded Player information, Legal information, and Asset Tagging. • By selecting Edit, the asset information can be adjusted. • Tap on Legal information to check open source licenses. 83 83... -
Page 84: Embedded Applications And Settings
Embedded Applications and Settings Embedded Digital Whiteboarding App Within ViewBoard, ViewSonic offers the embedded digital whiteboarding app, Whiteboard. Whiteboard Floating Bar Move the Floating Bar. Switch between presentation and preparation modes. Paste from the clipboard onto the canvas. Click to open the web browser Go to the previous canvas. - Page 85 Toolbar Full Screen Capture Toolbar Move But- Select and hold to move the toolbar to the left side, right side, or bottom of the screen. File Button 1. New Whiteboard File 4. Save as File 2. Open File 5. Export 3.
-
Page 86: Viewboard Cast
ViewBoard Cast Working with ViewBoard® Cast software, the vCastReceiver app, will allow the ViewBoard® to receive vCastSender laptop screens (Windows/Mac/Chrome) and mobile (iOS/Android) users’ screens, photos, videos, annotations, and camera(s). Network Information • ViewBoard® Cast software, laptops, and mobile devices can connect to both the same subnet and across the subnet network. -
Page 87: Cast Sender From Windows-Based, Macbook, And Chrome Devices
Cast Sender from Windows-based, Macbook, and Chrome devices. Mac, Windows, Chrome Devices: 1. Make sure your device is connected to the same network as the ViewBoard. 2. Visit the address that is shown on the ViewBoard to download the application. 3. -
Page 88: Cast Sender From Mobile Devices: Ios-Based (Iphone, Ipad) And Android Os Based Phone/Tablet
Cast Sender from Mobile Devices: iOS-based (iPhone, iPad) and Android OS based phone/tablet. Android/iOS: 1. Make sure your device is connected to the same network as the ViewBoard. 2. Scan the QR Code that is shown on the ViewBoard to download directly from the server, or download from the Google Play Store or the Apple Store. -
Page 89: Screen Recorder
Screen Recorder Capture everything that is displayed on screen in a video format. To launch the Screen Recorder application: 1. Select the Screen Recorder icon in the application drawer. 2. Tap the record icon and select the preferred recording configurations. Then tap the check mark. -
Page 90: Air Class
Air Class Display quiz questions on the ViewBoard and allow up to 30 mobile users to submit answers remotely. Whether deploying single or multiple choice questions, the ViewBoard will record the results for each device being used. Network Information • PC (Windows/Mac/Chromebook) and tablet/mobile (iOS/Android) devices, as well as the ViewBoard need to be linked to the same LAN network subnet. - Page 91 To launch Air Class: 1. Tap the tool bar trigger icon and select the more tools icon. Then select the Air Class icon. 2. Select “Enter the class”. 3. Choose from the available interactive functions at the bottom of the screen. Item Description Voter...
-
Page 92: Voter
Voter 1. Select the Single choice or Multiple choice icon to select the preferred answer type. 2. Tap BEGIN VOTING to let the participants start. 3. After the participants are finished and press OK, the ViewBoard will show the participant‘s name on screen. 4. - Page 93 6. Choose the right answer to show the correct rate. 7. Click the Explain icon ( ) to further analyze the topic. 93 93...
-
Page 94: Judge
Judge 1. Tap BEGIN VOTING to let the participants start a True/False questionnaire. 2. After the participants are finished and press OK, the ViewBoard will show the participant‘s name on screen. 3. Tap FINISH VOTING to close the quiz. 4. Then the participants’ “Answer Statistics” will be displayed. 94 94... -
Page 95: Responder
1. Choose the right answer to show the correct rate. 2. Click the Explain icon ( ) to further analyze the topic. Responder Participants race to select their answer and tap OK to submit their answer. 95 95... -
Page 96: Selector
Selector 1. Select the “Selector’ icon. 2. Set the number of participants to be selected. NOTE: The number of participants that can be selected will be based on the total number of participants. 3. Tap START to start the random selection. 4. -
Page 97: Message
Message To allow messaging: 1. Tap the “Message” icon to enable the function. 2. Participants select “Message” to change to the message interface. 3. Participants key in their message then select SEND. 4. The message will scroll across the top of the ViewBoard. Manager Select the icon to let more participants join the class. -
Page 98: Other Default Applications
Other Default Applications vSweeper Clear unnecessary data and unwanted files. Advanced Settings can also be customized to the user’s needs. 98 98... - Page 99 Screen Lock Set a screen lock password and enable screen lock. NOTE: If the user forgets the password, use the remote control and press INPUT-0-2-1-4 to restore the password to default. To set a screen lock password: 1. Go to: Settings > Personal > Password for screen lock, or select the Screen Lock icon in the apps list.
-
Page 100: Chromium
Chromium Web browser for surfing the Internet. -
Page 101: Folders
Folders 1. Storage Device Display Select the appropriate storage device. 2. Icons Item Description Click to exit. Exit Click to sort file. Sort Click to display file by thumbnail mode. Thumbnail Click to display file by list mode. List Click to select file. Select Click to add folder. - Page 102 3. File Type Menu Item Description All types OFFICE files Image stored by myViewBoard, Side Tool Note Bar, and remote control Screen Capture button. Picture Image files Media Audio and Video files 4. File Information Preview the image, show the image’s name, size, resolution, and creation date. 5.
-
Page 103: Rs-232 Protocol
RS-232 Protocol This document describes the hardware interface spec and software protocols of the RS-232 interface communication between ViewSonic LFD and a PC or other control units with RS-232 protocol. The protocol contains three command sections: • Set-Function • Get-Function •... -
Page 104: Lan Hardware Specification
LAN Hardware Specification ViewSonic LFD communication port on the rear side: 1. Connector type: 8P8C RJ45 2. Pin Assignment: Pin # Signal Remark Output from Display Output from Display Input to Display BI_D3+ For 1G case BI_D3- For 1G case... -
Page 105: Protocol
Protocol Set-Function Listing The PC can control the Display for specific actions. The Set-Function command allows you to control the Display behavior at a remote site through the RS-232 port. The Set-Function packet format consists of 9 bytes. Set-Function Description: Length: Total Byte of Message excluding “CR”... - Page 106 Example 1: Set Brightness as 76 for Display (#02) and this command is valid Send (Hex Format) Name Length Command Type Command Value1 Value2 Value3 0x30 0x38 0x73 0x24 0x30 0x37 0x36 0x0D 0x32 Reply (Hex Format) Name Length Command Type 0x30 0x34 0x2B...
- Page 107 Set-Function Table A. Basic Function Set Function Length ID Command Command Value Range Comments Code Code (Three ASCII Type (ASCII) (ASCII) (Hex) bytes) 1. The Power-on via LAN control may works only under specific mode. To Power on / off 000: STBY *3.2.1 see display UG for...
- Page 108 Set Function Length ID Command Command Value Range Comments Number 000~009 *3.1.1 000: UP 001: DOWN 002: LEFT 003: RIGHT Key Pad *3.1.1 004: ENTER 005: INPUT 006: MENU/(EXIT) 007: EXIT Disable: RCU will be no function Enabled: RCU controls normally 000: Disable Remote Pass through:...
- Page 109 B. Optional Function Set Function Length ID Command Command Value Range Comments Code Type (ASCII) Code (Hex) (Three ASCII bytes) (ASCII) Contrast 000 ~ 100 Sharpness 000 ~ 100 Color & 000 ~ 100 Tint ‘ 000 ~ 100 000: Off Backlight On_Off 001: On *3.2.3...
-
Page 110: Appendix
Specifications Item Category Specifications P/N. IFP6552 - 1C IFP7552-1C IFP8652-1C IFP6552-1CN IFP7552-1CN IFP8652-1CN Model VS18786 VS18789 VS18791 Screen Size 65.5” 74.5” 85.4” 4 x HDMI 1 x VGA 1 x USB Type-C Input Signal 1 x Audio In 2 x LAN (RJ45) -
Page 111: Display Modes
Display Modes VGA Mode Resolution Refresh Rate (@) 640 x 480 60Hz, 72Hz, 75Hz 800 x 600 56Hz, 60Hz, 72Hz, 75Hz 1024 x 768 60Hz, 70Hz, 75Hz 1152 x 864 75Hz 1280 x 720 60Hz 1280 x 768 60Hz 1280 x 800 60Hz 1280 x 960 60Hz... -
Page 112: Type-C Mode
Type-C Mode Resolution Refresh Rate (@) 640 x 480 60Hz, 75Hz 800 x 600 60Hz, 75Hz 1024 x 768 60Hz, 75Hz 1280 x 800 60Hz 1280 x 960 60Hz 1280 x 1024 60Hz 1440 x 900 60Hz 1920 x 1080 60Hz 3840 x 2160 24Hz, 30Hz, 60Hz... -
Page 113: Troubleshooting
Troubleshooting This section describes some common problems that you may experience when using the ViewBoard. Problem or Issue Possible Solutions 1. Check whether something is obstructing the display’s remote control receiver. Remote Control is not 2. Check whether the batteries in the remote control working are installed correctly. - Page 114 Touch Function Problem or Issue Possible Solutions 1. Check that drivers are installed correctly. 2. Reinstall driver(s). Touch function does not work 3. Check setup and align it. 4. Check whether the touch pen is working properly. Video Not Working Properly Problem or Issue Possible Solutions 1.
-
Page 115: Maintenance
Some chemical cleaners have been reported to damage the screen and/or case of the device. • ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. NOTE: If condensation appears between the glass and the panel, keep the... -
Page 116: Regulatory And Service Information
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. ViewSonic is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. -
Page 117: Industry Canada Statement
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Industry Canada Statement CAN ICES-003 (A)/NMB-003(A) CE Conformity for European Countries The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EC. -
Page 118: Energy Star® Statement
U.S. Environmental Protection Agency. As an ENERGY STAR® Partner, ViewSonic is determined to meet the ENERGY STAR® Guidelines and mark all certified models with the ENERGY STAR® logo. -
Page 119: Product Disposal At End Of Product Life
Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more. USA & Canada: http://www.viewsonic.com/company/green/recycle-program/ Europe: http://www.viewsoniceurope.com/eu/support/call-desk/... -
Page 120: Copyright Information
VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 121: Customer Service
For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia Bangladesh www.viewsonic.com/au/ www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn 香港 (繁體中文) www.viewsonic.com/hk/ Hong Kong (English) India www.viewsonic.com/hk-en/ www.viewsonic.com/in/... -
Page 122: Limited Warranty
ViewSonic® Smart White Board What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, and as your sole remedy, repair or replace the product with a similar product. - Page 123 (e) the serial number of the product. • Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®. • For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®. Limitation of implied warranties:...
- Page 124 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: • Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of...
-
Page 125: Mexico Limited Warranty
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components &... - Page 126 Exclusion of damages: ViewSonic®’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: • Damage to other property caused by any defects in the product, damages...
- Page 127 Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.
- Page 128 C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Process Color Pantone Black C Spot Color Pantone 187 C Spot Color...