Advertisement
Featuring two premium 12" Eminence 250W drivers and full stereo capability, the all new USA-made Peavey
Robert Randolph Signature 212 Cabinet is perfectly suited for use with the new Robert Randolph Signature Amp
Head. Given Robert's versatility with all types of instruments, this cabinet was specifically voiced to his tastes for
a wide variety of pedal steel, lap steel, and conventional electric guitar applications. Solid 3/4" 18-ply Russian
Birch construction and premium components insure extreme road worthiness and reliability. This cabinet is also
a GREAT choice for use with any number of other amplifiers where high sound pressure levels, full-range fre-
quency response, and faithful reproduction of a given amplifier is desirable. With most conventional heads, it is
also a great choice for use in live and studio applications where a clear tone with less-than-typical cone breakup
characteristics are desirable for all sorts of miking setups. This is a true "Swiss Army Knife" of a cabinet where
the best possible sound reproduction of any guitar rig and full transparency is paramount. In STEREO mode,
you get a left/right configuration rated at 8 Ohms per side at over 250W per side. In MONO mode, it becomes a
16 Ohm cabinet capable of handling a whopping 500W+ of Earth-shattering power.
Power Handling:
500 Watts Mono
250 Watts/channel Stereo
Transducer Compliment:
Two proprietary Eminence 8 Ohm, 12" speakers
Weight - 71.4 lbs
Dimensions - 30.5"W x 16.5"D x 21.0"H
Robert Randolph Signature
Impedance:
Mono - 16 Ohms
Stereo - 8 Ohms per side
Input Connections:
1/4" inputs with stereo/mono switch
212 Cabinet
Specifications
Advertisement
