Download Print this page

Peavey Robert Randolph Signature 212 Operating Manual page 10

Amplifier head

Advertisement

Nominal Output Level: -4.73dBV, 580mV(rms)
Rear Effects Loop Returns:
Impedance: 1M Ohms
Designed Input Level: -4.73dBV, 580mV(rms)
(Switching jack provides preamp output to power amp input connection when
not used)
System Hum & Noise @ Nominal Input Level:
(20Hz to 20kHz unweighted)
Greater than 70dB below rated power
Equalization:
Low: +/-15 dB @ 45 Hz, shelving
Mid: +/-15 dB @ Mid Shift frequency, boost/cut
Mid Shift: 150Hz to 1.5kHz
High: +/-15 dB @ 6 kHz (special EQ)
Presence: +/-15 dB @ 10 kHz, shelving
External MIDI Hand Controller (included) Functions:
BOOST: Boost defeat/enable
SPRING REVERB: Spring reverb defeat/enable
EFFECTS: Digital effects section defeat/enable
TAP: Tap Tempo setting for digital delay section
POST EQ EFFECTS LOOP: Post EQ effects loop defeat/enable
REAR LOOP: Rear panel stereo effects loop defeat/enable
Dimensions & Weight:
11.0" (280mm) L x 24.5" (623mm) W x 9.5" (242mm) H;
29.0 lbs (13.2 kg)
NOTE: Specifications are subject to change without notice.

Advertisement

loading