Advertisement
・Channel Connections
e Channel jacks may be used to connect to the PV Lite 3000 or any other 0-10 volt driven lighting
unit. The connection needs to made with 6-pin telephone cables.
+ Sync Out Connection
made with a 1/4" instrument cable.
+ Function Jack
Peavey. Peavey part #0007907
+ Channel Jack
+ Line Audio Out Connections
The Line Audio Out jacks can be used to connect to power amplifiers, effect units, equalizers,
crossovers, etc. These connections need to be made with cables that have an RCA connector at one
end.
+ Line Audio In Connections
The Line Audio In jacks can be used to accept input from a mixer, stereo, CD player, preamp,
karaoke (such as the Protege by Peavey), etc. These connections need to be made with cables that
have an RCA connector at one end.
TOLE
or
lluminator 600
Footswitch
| CD player. preamp,
PV-Lie 3000
karaoko, eto
any other 0-10 vot lighting unit
To PY-Lite 3000
To Furciion 。 Topowerampifer
or
Footswitch
effects unt, Eas,
any other 0-10 vott lighting unit
crossovers. atc
Phone Jack Pin-Out Diagram
Note:
By using the following diagram and pin-out diagrams from other manufacturers' units, (such as
dimmers and relay packs), you can interface these units with the LICON 416 for 4-channel 0 to
10 volt control purposes.
Channel 2 Channel 3
Channel 1 \
f
Channel 4
Ground
Ground
Specifications
Power:
16.5 volt AC 1000 mA
Outputs:
0voltDC
- "Off"
10voltDC
- "On"
Dimensions:
19.000"(L) x 4.500"(W) x 1.750"(H)
Advertisement
