Table of Contents
Advertisement
SPECIFICATIONS
CHARACTERISTICS: (@ 120 VAC, 60 Hz)
OUTPUT POWER: (Typical value)
Stereo mode, both channels driven
2 ohms. 1 kHz,
1%
THD
750 W RMS per chan
4 ohms. 1 kHz, 1%THD
-
550 W RMS per chan
8 ohms, 1 kHz. 1% THD
-
300 W RMS per chan
Bridge mode, mono
4 ohms. 1 kHz, I
%
THD
.
1500 W RMS
8 ohms. 1 kHz. 1
%
THD
-
1100 W RMS
RATED OUTPUT POWER:
Stereo mode, borh channels driven
4 ohms. 20 Hz to 20 kHz. 0.04% THD
500 W RMS per chan
8 ohms. 20 Hz to 20 kHz. 0.04% THD
-
250 W RMS per chan
POWER BANDWIDTH: (Typical value)
Stereo mode, both channels driven
@ rated power, 4 ohms. <0.1 % THD
10 Hz to 40 kHz
SLEW' RATE: (Typical value)
Stereo mode, each channel
40 Volts per uSec
Bridge mode, mono
-
80 Volts per uSec
TOTAL HARMONIC DISTORTION: (Typical)
Stereo mode, both channels driven
20 Hz to 20 kHz. 4 ohm rated load
Less than 0.04%
INPUT SENSITIVITY
&
IMPEDANCE:
Input attenuator set @ FCW
@ rated output power, 4 ohms
I.OV RMS (OdBV)
-
20K ohms (+33 dB)
FREQUENCY RESPONSE: (Typical value)
Stereo mode, both channels driven
+(),-1 dB. 1 W RMS. 4 ohms
10 Hz to 40 kHz
+0, -0.2 dB
@
rated output, 4 ohms
-
20 Hz to 20 kHz
DAMPING FACTOR: (Typical value)
Stereo mode. 8 ohms, 1 kHz
-
Greater than 300
HUM & NOISE:
Stereo mode, below rated power, 4 ohms
-
100 dB. unweighted
POWER CONSUMPTION:
Stereo mode, both channels driven
rated output power, 4 ohms
13 A @ 120 VAC
COOLING SYSTEM:
-
Dual 2 speed fans
DDT COMPRESSION SYSTEM:
-
Switchable w LED
DIMENSIONS & WEIGHT:
Height
.
3.50"
(8.9 cm)
Width
-
19"
(48.3 cm)
Depth
-
17"
(43.2 cm)
Weight
-
35 lbs. (15.9 kg)
TWO RACK SPACE, CLASS BG, DUAL RAIL DESIGN WITH NSSER TOPOLOGY
(NSSER: non-saturating series single emitter resistor)
Specifications subject to change without notice; patenl pending
Advertisement
Table of Contents
