Cleaning The Fuel-Intake Screen; Electrical System Maintenance; Charging And Connecting The Battery - Toro Reelmaster 7000-D Operator's Manual

Figure 82
1. Fuel-filter head
2. Remove the filter and clean the filter-head
mounting surface
3. Lubricate the filter gasket with clean lubricating
engine oil. Refer to the engine operator's
manual, included with the machine, for additional
information.
4. Install the dry filter canister, by hand, until the
gasket contacts the filter head, then rotate it an
additional 1/2 turn.
5. Start the engine and check for fuel leaks around
the filter head.
Cleaning the Fuel-Intake
Screen
The fuel-intake tube, located inside the fuel tank, is
equipped with a screen to help prevent debris from
entering the fuel system. Remove the fuel-intake tube
and clean the screen as required.
2. Fuel filter
(Figure 82).
Electrical System
Maintenance
Charging and Connecting
the Battery
Proposition 65 Warning
Battery posts, terminals, and related
g021291
accessories contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm. Wash
hands after handling.
1. Unlatch and raise the operator's console panel
(Figure 83).
1. Operator's console panel
58
WARNING
CALIFORNIA
Figure 83
2. Latch
g026705
g026705