Wireless Connection - ViewSonic VS13647 User Manual

Wireless connection

ViewSonic
wireless dongle
To connect to the projector wirelessly, you have to plug a ViewSonic wireless dongle
(optional) to the USB Type A connector on the projector, and then only a few OSD
configuration steps are required.
1. Make sure the projector is turned on.
2. Press MENU/EXIT on the projector or Menu on the remote control and then press
/ until the Network menu is highlighted.
3. Highlight Wireless LAN and press ENTER on the projector or Enter on the
remote control.
4. Make sure the Status is Connect.
5. Make sure the SSID information is displayed.
6. In AP mode, you need to use your computer's wireless connection utility to search
the projector's SSID and connect to it. Then you can search the projector with
vsPresenter. To use Infrastructure mode, you should connect both your
computer and projector to the same AP router and make connections with the IP
address.
ViewSonic Pro8400 39