Table of Contents
Advertisement
Installing the T811-CM
•
Safety Information...................................................................................................................................................... 19
•
Unpacking the T811-CM............................................................................................................................................. 19
•
Required Hardware and Tools................................................................................................................................... 20
•
Package Contents........................................................................................................................................................ 20
•
Mounting the T811-CM............................................................................................................................................... 20
•
Earth Grounding the T811-CM................................................................................................................................... 21
•
Installing the Cable Power Tap...................................................................................................................................21
•
Powering the T811-CM with POC...............................................................................................................................21
•
Checking the T811-CM Signal Level with an RF Power Meter (Optional).............................................................. 22
•
Performing Attenuation and Impedance Matching................................................................................................ 22
•
Configuring the T811-CM for the First Time (Optional).......................................................................................... 22
•
Verifying CM and AP Operation................................................................................................................................. 28
Safety Information
WARNING
Only trained and qualified installers should be allowed to install, replace, or service this equipment. The professional
installer is responsible for the proper installation and configuration of this AP. The AP installation must comply with local
regulatory requirements, especially with those regulating operation near military and/or weather radar systems.
WARNING
Installation of this equipment must comply with local and national electrical codes.
WARNING
Ruckus Wireless strongly recommends wearing eye protection when mounting the AP.
CAUTION
Make sure that you form a 80mm - 130mm (3"-5") drip loop in any cable that is attached to the AP or other
equipment. This will prevent water from running along the cable and entering the AP or other equipment.
CAUTION
Be sure that grounding is available and that it meets local and national electrical codes. For additional lightning
protection, use lightning rods and lightning arrestors.
CAUTION
Make sure that proper lightning surge protection precautions are taken according to local electrical code.
Unpacking the T811-CM
1.
Open the T811-CM package, and then carefully remove the contents.
2.
Return all packing materials to the shipping box, and put the box away in a dry location.
3.
Verify that all items listed in Package Contents are included in the package. Check each item for damage. If any item is
damaged or missing, notify your authorized Ruckus Wireless sales representative.
T811-CM Strand-Mount Cable Modem AP Installation Guide
Part Number: 800-71436-001 Rev B
19
Advertisement
Table of Contents
